Wonder if anyone could suggest why there is no sound coming from the RedDrum Drum Computer in Reason 2.5. I just installed Reason, and i was following the "Getting Started" guide on creating a new track. After i opened the RedDrum Drum Computer, and added a Patch, it said preview each drum sample by clicking the play button above each sample. But no sound comes out at all. Also in edit mode, i can't hear anything. Other instrumnts are fine. And i have installed the Factory sound bank and Orkestra etc. Any suggestions pls?

Check you routing.

In Christ,
DJ Youth

___________________
We all worship something.

Last edited by djyouth on Feb-24-2005 at 15:07

Hit so you enter the routing 'wiring' mode and check that out the back of the redrum machine (main left/right outputs (on the right if i remember correctly) are connected to a channel input on your main mixer (should be on the top left of the back of your mixer)

___________________
--------------------
Yoji Rocks fullstop.

seems to be working now, although it is still wired the same as it was in the first place. oh well, thx anyway.

One other thing, in the arrangement timeline, there are 3 little pointy tabs, labelled L, P and R. I understand P must stand for Play? or Position? as it moves when you press play. What do L and R stand for and what do they do?

quote:

Originally posted by Tech0rz seems to be working now, although it is still wired the same as it was in the first place. oh well, thx anyway. One other thing, in the arrangement timeline, there are 3 little pointy tabs, labelled L, P and R. I understand P must stand for Play? or Position? as it moves when you press play. What do L and R stand for and what do they do?

L and R are the left and right tab positions. You can use these to select (and subsequently preview or export) a section of your track. To set the L and R positions either click and drag them, set their position values using the counter on the Reason Transport module at the bottom, or Ctrl + click (for Left) and Alt + click (for Right). If you activate the Loop On/Off button the track will jump back to the Left pointer when it reaches the Right counter. You can also use these pointers to export a loop. Do this by setting the L and R pointers then selecting "Export Loop As Audio File..." from the File menu.

Hope this helps...

___________________

"I expect to pass through life but once. If therefore, there be any kindness I can show, or any good thing I can do to any fellow being, let me do it now, and not defer or neglect it, as I shall not pass this way again."

thanks thats just what i wanted to know ^ ^