Dont meant to steal your thread but

I have a Question about needles also.

When I put it in the beginning of the vinyl sometimes it would slide about .5 inch in its werid. On some records I would try about 3 times and then it will start going in the groove. But sometimes it just slides .5 inches in and starts to play. Does it mean more weight or bad needle?

n3lly is that stuff can you get it out? Try compressed air

___________________
Dan K

Sounds like dirt is coming out of the grooves to me N3lly. Clean them with a cotton cloth and some distilled water and alcohol (recipes below)
And buy a carbonfiber vinyl brush to keep the dust away.

http://www.tnt-audio.com/clinica/fluids.html

___________________
Trance- A State Of Altered Consciousness

Last edited by MagicImpuls on Feb-08-2006 at 17:41

id steer away from whitelabels to be honest. best sounding needles ive ever owned but they lasted me less than a month and i never scratch or cue heavily

___________________
...I'll be back for breakfast

Sounds like heavy dirt on the vinyl mixed with a little grease. Maybe also you should check the counter weight on it, maybe you have it to heavy...

___________________

Hey lads,

Cheers for the replies, will try all of the above..

Basstard - I think i might go with the Shure M44-7's (think those are the ones)

Unless people think they're crap. Just can't afford the shure whitelabels at the moment, and if you say they wear out quickly... well doesn't really make sense.

By the by, Serato is amazing! Track selection freedom is a great feeling.. Anywho..

i'm gonna have to re-setup my tonearms again. Not 100% happy with em..

nelly

I think you might want to go with the m44g instead of m447 the m447s are for scratching.

My M44Gs lasted about a month as well. Replaced them with Ortofon Concorde DJ-Ss, and haven't looked back. That was almost 5 years ago.

Hmmm.. i thought this would be a lot easier then this...

Well then, i don't scratch, i don't really have a huge budget so something middle of the line (or slightly over) would be preferable

Anyone got any suggestions ?

Thanks

nelly

I have m44gs they are the original carts/styluses and still sound great after about 5/6 months. You dont need to spend big bux if its just for timecoded vinyl because you just need it to basicaly work.
I believe m44gs will be perfect getting whitelabels or ortofon concords will be over kill.

quote:

Originally posted by DJ 00 Tommy I have m44gs they are the original carts/styluses and still sound great after about 5/6 months. You dont need to spend big bux if its just for timecoded vinyl because you just need it to basicaly work. I believe m44gs will be perfect getting whitelabels or ortofon concords will be over kill.

m44gs are amazing. <3 mine to death. Beefy needle with good sound.

___________________
Fortuna Favet Fortibus.

Good stuff! Thanks lads

Think i'll have to go for them so as i just don't have the budget to go for anything nicer at the moment.

Plus your timecoded vinyl comment makes sense as well.

Cheers

nelly