I have a pair of CDJ-200's and one of the plates on one of the units is looser than the other. Does anyone know if there is a way to adjust this? Should i return the one that's loose? Any advice would be greatly appreciated. Thanks,

T

common problem, search around for the various threads...



here is one such thread

you guys should trade one

___________________
Tony Morello Dot Com
Soundcloud
Facebook
Twitter
The Drunken Monkey Podcast
The Mixdown Podcast presented by Tony Morello

lol, shotgun on the good one.

pull each wheel up a bit. its cos one of them is rubbing against the casing. you can pull them completely off without doing any damage i think

___________________
*** Sig edited -> no banner ads in sig
----------------------------------------
http://img404.**************/img404/2794/deresionbanneryx4.jpg
www.deresion.com

quote:

Originally posted by richg101 pull each wheel up a bit. its cos one of them is rubbing against the casing. you can pull them completely off without doing any damage i think

I had the same problem, one Cdj was smooth and the other one was hard.

the one that was hard I pulled the the jog-wheel off, and then place it (Not to the end), but by the time I was playing with it , it would finally end up rubbing against the casing, therefore started to be not smooth again.

to solve this, I stick a little tiny piece of paper on the back of the jog-*wheel (if you pull the jog wheel out, you will know were I placed it), now it doesn't rub against the case, because the little paper won't let it.

so far it's working well for me.

___________________
Here are my latest mixes:
Pepa - Pure Bliss (June 2007 Promo)
Pepa - Visual Thoughts (March 2007 Promo)
Pepa - Trippin' Again

Mash-ups:
Perasma Vs BT - Swing 2 Gravity (Pepa Live Mash-up)
I Trance You!