How does your internet PC hook up to the internet? is it via a USB modem or a network cable to a router?

Cheap way: buy or make a Network cross over cable.

One possible way is using a cross over network cable to hook both your macs together via their network sockets. Then you can setup one mac with the following network card settings:

IP address: 192.168.1.1
Subnet mask: 255.255.255.0

The other mac would then have these settings:

IP address: 192.168.1.2
Subnet mask: 255.255.255.0

I dont have a mac, but I guess you'd need to look at the preferences or setup part of Tiger for the network card properties/options.

Slightly expensive way:

Two RJ45 network cables and a 4 port switch made by a company like Netgear/Linksys etc. Hook the network cables to the mac's and the switch and then setup the network cards in the same manor as my cheap solution.


Once you're hooked up, i think you'll need to setup smb shares or something on the mac to see the necessary folders - maybe someone else could help out on the mac side?

Hope that helps a bit.

G5s autosense cable type and so you don't actually need a crossover cable to talk to the G4, a regular ethernet cable will do it.

Great set of step by step instructions here:-

http://www.applelinks.com/index.php...hernet_network/

And in a desperate attempt to get back on topic, this is a grat way to share samples or set up a MIDI & audio over ethernet setup..