|
Re: Conroe music machine
| quote: | Originally posted by Zombie0915
I spent almost 2K yesterday. Video card from newegg. CPU, mobo, thermal goo from buy.com, and everything else(monitor,kb,mouse,case, etc) from zzf.
I figure this is the nicest music production station I could have gotten for $1800 us(includes shipping), assuming it works of course. I had to compromise a bit, I would love to have an RME sound card in there, an expensive lian li case, thousand dollar speakers, nicer ram, an x6800, a 7900gt top silent, dual LCD's, but that is all out of my reach, this is a good compromise for me I think.
|
Congrats on your new setup! Your choice on most of the parts, I think, are spot on, i.e. you won't find better memory modules than Corsair og more quite (and reliable) hard drives than the Seagate Barracuda (in my opinion). I have one advice though: Get one more hard drive on, say, 60 GB or so. It's not much extra and it will give you a tremendous performance boost if you configure your system with the operating system on the extra hard drive (60 GB would be sufficient) and then put the two Barracuda 320 in a raid 0-configuration for double read and write speeds (using the onboard raid controller). A setup like that works perfect for me. Just remember to backup your data often, as the raid 0 configuration does not mirror any data (and is more vulnerable due to the fact that data has been split on two disks instead of just one).
| quote: | Originally posted by simonbostock
I reckon Zalman make the best CPU coolers around - they're probably the quietest. They are well worth the tiny bit of extra cash on.
|
Not really. You wanna get a SCNJ-1000P from the company "Scythe" instead. This is a passive cooler - NO FAN - that indeed will cool your Conroe. A passive cooler will beat any fan-based cooler (also the ones from Zalman) when it comes to noise at any time. And believe me: Even the most quiet fan-based CPU-coolers who are said to only produce noise levels below the ambient noise floor and all that marketing b s, can still be heard very much by the human ear - and that's so annoying, especially for using the computer with music production, where the sound and listening environment are so much important. I own the passive CPU cooler and it works perfect. You'll be amazed at how effectively it cools. And the computer is not "low-noise" (or whatever all these so-called quiet CPU-coolers call it), no it's not low-noise, it's actually quiet! Nothing more, nothing less. If it wasn't for the led on the front, you wouldn't know if the computer was turned on or off.
Finally, I will recommend to try and install the hard drives as far as possible from each other as they tend to get very hot, if you're running a system with no fans at all. I have (just to be on the safe side) a low-noise 12 V fan sitting behind the hard drives, that will start if the temperature rise to a certain level (allthough it has never happened, I think it's nice to be safe). This can blow air all the way through from the front to the back, if need be.
Anyway, congratulations once more on your new purchase. And please let us know, what your experiences with the system are when it arrives and get installed.
And finally: Don't get dissapointed, when you realize that you can't have 3 instances of Z3ta, 4 instances of Sytrus, 2 convolution reverbs, 35+ VST-effects, 40 tracks of audio etc. running at the same time at 24 bit, 96000 hz. The Conroe beats the hell out of any processor on the market (except for quadro-conroe conf on the planned Mac, I guess), but it does have its limitations too, unfortunately... And I'll suspect you still have to use your effects, VSTi's etc. conservatively and wise to avoid CPU or memory issues.
Regards
___________________
RiValMan
- Pumping the bits using:
My beloved MacBook Pro, Logic Pro X, UAD hardware and software and tons of plug-ins...
|