Become a part of the TranceAddict community!Frequently Asked Questions - Please read this if you haven'tSearch the forums
TranceAddict Forums > DJing / Production / Promotion > DJ Booth > R.I.P. Pioneer Djm-600
Pages (4): [1] 2 3 4 »   Last Thread   Next Thread
Share
Author
Thread    Post A Reply
SVGmethod
djcurly.com



Registered: Sep 2003
Location: LATA#555 (Santa Barbara, CA, USA)
R.I.P. Pioneer Djm-600

I was standing my mixer up while I was plugging all the cables into it...and I turned to pick something up and just then my mixer decided to bungee jump off my table. 3 feet high! Just before hitting the ground, the power cord tightened saving the mixer from the collision with the floor. 4 inches of cord was yanked out from the back panel of the mixer...and the plastic that kept the cord in place was yanked out as well and in pieces. Knobs flew everywhere. I gathered a channel 3 gain knob, a channel 1 bass knob, and a channel 4 mid knob. I was completely devasted. I plugged the power cord back into the outlet and turned on the mixer...


No lights came on. It's over.


600, it was a good run for the nearly 2 years we rocked parties all over town. You were there for me through all the hard times. You were there for me when I changed from a trance dj to a house dj. You have been used by dj's such as DJ Rap, M3, DJ Dan, Dave Aude, Max Cheddar, Bas & Clovis, and almost all local dj's in Santa Barbara. You were there for my transition from vinyl to digital. Its going to be hard to say goodbye.

I cant do this anymore. I have to go...




___________________
FACEBOOK | TWITTER

Old Post Nov-07-2006 09:17  Mexico
Click Here to See the Profile for SVGmethod Click here to Send SVGmethod a Private Message Visit SVGmethod's homepage! Add SVGmethod to your buddy list Report this Post Reply w/Quote Edit/Delete Message
veezee
Supreme tranceaddict



Registered: Oct 2000
Location: Vancouver, BC
Re: R.I.P. Pioneer Djm-600

quote:
Originally posted by SVGmethod
I was standing my mixer up while I was plugging all the cables into it...and I turned to pick something up and just then my mixer decided to bungee jump off my table. 3 feet high! Just before hitting the ground, the power cord tightened saving the mixer from the collision with the floor. 4 inches of cord was yanked out from the back panel of the mixer...and the plastic that kept the cord in place was yanked out as well and in pieces. Knobs flew everywhere. I gathered a channel 3 gain knob, a channel 1 bass knob, and a channel 4 mid knob. I was completely devasted. I plugged the power cord back into the outlet and turned on the mixer...


No lights came on. It's over.


600, it was a good run for the nearly 2 years we rocked parties all over town. You were there for me through all the hard times. You were there for me when I changed from a trance dj to a house dj. You have been used by dj's such as DJ Rap, M3, DJ Dan, Dave Aude, Max Cheddar, Bas & Clovis, and almost all local dj's in Santa Barbara. You were there for my transition from vinyl to digital. Its going to be hard to say goodbye.

I cant do this anymore. I have to go...





that is a crappy deal, and I am sorry to hear that happened to you! Would it be to much to ask if I can buy your knobs/caps off you? I have alot missing off of mine... please email me jveezee at hotmail dot com .. Thanks

Jay

Old Post Nov-07-2006 09:51  Canada
Click Here to See the Profile for veezee Click here to Send veezee a Private Message Add veezee to your buddy list Report this Post Reply w/Quote Edit/Delete Message
Tony Morello
The Renegade Master



Registered: Apr 2001
Location: Calgary, Alberta, Canada

i had to laugh when i saw the picture, sorry bout your luck

look at it this way, now you can buy an 800

the 600 would've wanted it that way


___________________
Tony Morello Dot Com
Soundcloud
Facebook
Twitter
The Drunken Monkey Podcast
The Mixdown Podcast presented by Tony Morello

Old Post Nov-07-2006 10:18  Canada
Click Here to See the Profile for Tony Morello Click here to Send Tony Morello a Private Message Visit Tony Morello's homepage! Add Tony Morello to your buddy list Report this Post Reply w/Quote Edit/Delete Message
SVGmethod
djcurly.com



Registered: Sep 2003
Location: LATA#555 (Santa Barbara, CA, USA)

lol the story and the pic were just a way to make me laugh a little bit about the situation...its outta my control. cant do anything about it. it sux tho. yeah im looking into getting the 800 now. wheres a cheap place to buy one at in the US?


___________________
FACEBOOK | TWITTER

Old Post Nov-07-2006 10:28  Mexico
Click Here to See the Profile for SVGmethod Click here to Send SVGmethod a Private Message Visit SVGmethod's homepage! Add SVGmethod to your buddy list Report this Post Reply w/Quote Edit/Delete Message
T-Soma
The Sky Was Pink...



Registered: Oct 2004
Location: Chair

Call up pioneer and tell them about their faulty products

Maybe it was a sign from (instert name of higher being) that its time for an upgrade.


___________________


Sign this petition!

Old Post Nov-07-2006 10:38  Australia
Click Here to See the Profile for T-Soma Click here to Send T-Soma a Private Message Add T-Soma to your buddy list Report this Post Reply w/Quote Edit/Delete Message
volts_wagen
tranceaddict in training



Registered: Oct 2003
Location: New Zealand
Smile

quote:
Originally posted by T-Soma
Call up pioneer and tell them about their faulty products


Didnt know pioneer made faulty products???

But yes the pioneer is not made anymore so it is time for an upgrade to the even more sexier 800!!

Old Post Nov-07-2006 11:08  New Zealand
Click Here to See the Profile for volts_wagen Click here to Send volts_wagen a Private Message Add volts_wagen to your buddy list Report this Post Reply w/Quote Edit/Delete Message
idoru
You Can Call Me Al



Registered: May 2004
Location: Cascadia

Ouch, damn dude, that sucks.

quote:
Originally posted by Tony Morello
i had to laugh when i saw the picture, sorry bout your luck

look at it this way, now you can buy an 800

the 600 would've wanted it that way


Or a *cough*Xone*cough*.

Old Post Nov-07-2006 11:42 
Click Here to See the Profile for idoru Click here to Send idoru a Private Message Add idoru to your buddy list Report this Post Reply w/Quote Edit/Delete Message
T-Soma
The Sky Was Pink...



Registered: Oct 2004
Location: Chair

quote:
Originally posted by volts_wagen
Didnt know pioneer made faulty products???


Hehe I was joking, it would be funny trying to convince them that their mixer is faulty and had randomly exploded.
Infact... tell them it imploded then exploded


___________________


Sign this petition!

Old Post Nov-07-2006 12:17  Australia
Click Here to See the Profile for T-Soma Click here to Send T-Soma a Private Message Add T-Soma to your buddy list Report this Post Reply w/Quote Edit/Delete Message
sterilis
Sunset Ibiza



Registered: May 2005
Location: Belfast/Ibiza/Manchester

shit one. first rule of djing look after your equipment


___________________
Official Site - www.sterilis.co.uk

Old Post Nov-07-2006 15:02  Ireland
Click Here to See the Profile for sterilis Click here to Send sterilis a Private Message Add sterilis to your buddy list Report this Post Reply w/Quote Edit/Delete Message
Allied Nations
Make it happen cap'n



Registered: Mar 2004
Location: MTHELL

quote:
Originally posted by idoru

Or a *cough*Xone*cough*.


LOL I'd have a HARD time choosing between the two right now...

I LOVE the feel of the 800... love those faders... but the Xone... THE XONE!


___________________
Fortuna Favet Fortibus.

Old Post Nov-07-2006 15:15 
Click Here to See the Profile for Allied Nations Click here to Send Allied Nations a Private Message Add Allied Nations to your buddy list Report this Post Reply w/Quote Edit/Delete Message
RJT
last minute disco



Registered: Oct 2004
Location:

quote:
Originally posted by Allied Nations
LOL I'd have a HARD time choosing between the two right now...

I LOVE the feel of the 800... love those faders... but the Xone... THE XONE!


Yeah dude, the faders on the 800 are naiiice, but I think the faders on the Xone 62 are naiiiicer

If I ever decided to upgrade to a 92 though, it'd be all about the rotary. The faders on Xone 92's feel like childrens play toys.

Sorry to hear about your DJM m8 - But hey, times for new equipment is always fun!


___________________
last minute disco dot net

Old Post Nov-07-2006 15:58 
Click Here to See the Profile for RJT Click here to Send RJT a Private Message Visit RJT's homepage! Add RJT to your buddy list Report this Post Reply w/Quote Edit/Delete Message
n3lly
www.n3lly.com



Registered: May 2003
Location: Dublin

Here's a fun noob comment..

Reading on the internet, you often will think something is pronounced the way you say it. Little do you know it's pronounced differently.

Ecler was one for me. Anyway, none of my mates have an Xone, having said that none of them have a set up full stop

So i'm wondering, is it pronounced, X- ONE... or Xone (sounds like Zone)..

That is all

Old Post Nov-07-2006 16:13 
Click Here to See the Profile for n3lly Click here to Send n3lly a Private Message Visit n3lly's homepage! Add n3lly to your buddy list Report this Post Reply w/Quote Edit/Delete Message

TranceAddict Forums > DJing / Production / Promotion > DJ Booth > R.I.P. Pioneer Djm-600
Post New Thread    Post A Reply

Pages (4): [1] 2 3 4 »  
Last Thread   Next Thread
Click here to listen to the sample!Pause playbackBlank & Jones @ Loveparade 2000 [2005] [1]

Click here to listen to the sample!Pause playbackGrupo Mojado & Mr Sam - Naranja (Dimitri Andreas Vision) [2005]

Show Printable Version | Subscribe to this Thread
Forum Jump:

All times are GMT. The time now is 22:11.

Forum Rules:
You may not post new threads
You may not post replies
You may not edit your posts
HTML code is ON
vB code is ON
[IMG] code is ON
 
Search this Thread:

 
Contact Us - return to tranceaddict

Powered by: Trance Music & vBulletin Forums
Copyright ©2000-2026, Jelsoft Enterprises Ltd.
Privacy Statement / DMCA
Support TA!