Hi Iv got one stupid question

I change my setup and now iv got reloop 5000 and img stage line djp 202, and two diffrent systems (Before that I was playing on cdj 100 and that was a huge mistake.)

I am betmaching two tune - there are playing fine for 2 minutes... but sometimes I beatmach - there are playing ok for few sec but than there is a terrible mess up after few sec. Hope U know what I mean.

Its ok , ok and its not ok after vew seconds

Where am I making a mistake ? I guess that I betmach it not very well and the bpm are diffrent ? or what ?

___________________
Looking For a Gig

quote:

Originally posted by BTL Hi Iv got one stupid question I change my setup and now iv got reloop 5000 and img stage line djp 202, and two diffrent systems (Before that I was playing on cdj 100 and that was a huge mistake.) I am betmaching two tune - there are playing fine for 2 minutes... but sometimes I beatmach - there are playing ok for few sec but than there is a terrible mess up after few sec. Hope U know what I mean. Its ok , ok and its not ok after vew seconds Where am I making a mistake ? I guess that I betmach it not very well and the bpm are diffrent ? or what ?

this is common in most peoples mixes. Its very rarely you will get two tracks that wont need slight adjustment when mixing. while im mixing im always adjusting the pitch its just part of the djing.

___________________
Official Site - www.sterilis.co.uk

just keep riding the pitch...if uve practiced enough, you should be able to know which 1 is going faster or slower...make your adjustments accordingly. i tend to ride the pitch on the track that im transitioning out of...it seems to me that if your a second or so late...its not that very noticeable due to the fact that its not as loud as the track im throwing in

quote:

Originally posted by i got big pants just keep riding the pitch...if uve practiced enough, you should be able to know which 1 is going faster or slower...make your adjustments accordingly. i tend to ride the pitch on the track that im transitioning out of...it seems to me that if your a second or so late...its not that very noticeable due to the fact that its not as loud as the track im throwing in

yea never adjust the track playing that would sound utter shit. i play with the pitch of the incoming track until i drop the bass on it and cut the bass of the outgoing track then start riding the pitch on the outgoing track.

___________________
Official Site - www.sterilis.co.uk

Keep that hand glued to the pitch fader/pitch bend mechanism.

___________________
I've never been able to eat a whole baby.
Kill the women. Eat the children.
It's just one of those days where you want to bend over everyone you know and kiss their ass goodbye with a big sideways boot.

Latest Mix

quote:

Originally posted by dj_kane yea never adjust the track playing that would sound utter shit. i play with the pitch of the incoming track until i drop the bass on it and cut the bass of the outgoing track then start riding the pitch on the outgoing track.

EXACTLY.

I also make pitch corrections BEFORE I actually hear the drift occuring (because I KNOW they drifting) - stay ahead of the drift!

...make sure you always know which way the tracks are drifting, then just keep bending in the opposite direction. of course if you bend too much, you end up having to bend the other way, which can throw you off guard.

___________________
PATRICK KROFT
PatrickKroft.com ~ DI.fm Tribal House DJ ~ Last.fm Tribal House

with 0.02 cdj pitch adjustment, you can stay 1 min in front of your turntables without doing anything to correct. thats not true in vinyl, vinyl is not prefect, you will always have to readjust them.

___________________
In Tekila We Trust

Mon MySpace

next to that, with the resolution of TT-pitch/fader its never possible to EXACTLY beatmatch 2 tracks for as long as a track lasts. even if the resolution of your pitch-control on your TT's is for example to 1/100th accurate (which it aint, but hypothetically), youll never get 2 tracks beatmatched for as long as 2 tracks last. u can however keep em accurate enough for 2 or 3 minutes, but eventually, 1 will run out of the match ..

its a question of practice. when i started beatmatching, i thought i would be the 1st on this planet to never learn. fact is that i learned it in some 4 months (i used to plractice 1 or 2 hrs a day). this doesnt however mean that i can always find the proper pitch for an incoming track (in time). its VERY hard to control beatmatching 100% ..

I just got some CDJ1000s, it's taken me about 4 days to get to grips with beatmatching on them, very different from a pair of Techs.

BUT, once you've got the beats locked, well, everything is so predictable. Say for example you can hear the beat go out very slightly over 30 seconds. All you have to do is knock it up .02% after 15 seconds and down .02% after another.

Everything takes care of itself.

I do miss vinyl though - but I wouldn't swap back now.

Jarv

This is a video of me mixing that shows the pacing of beat matching, crossfading, etc...may help.


YouTube: Mixing Walk-Through

___________________
PATRICK KROFT
PatrickKroft.com ~ DI.fm Tribal House DJ ~ Last.fm Tribal House

Last edited by DJ Z on Jan-01-2007 at 19:52

quote:

Originally posted by Jarvmeister I just got some CDJ1000s, it's taken me about 4 days to get to grips with beatmatching on them, very different from a pair of Techs. BUT, once you've got the beats locked, well, everything is so predictable. Say for example you can hear the beat go out very slightly over 30 seconds. All you have to do is knock it up .02% after 15 seconds and down .02% after another. Everything takes care of itself. I do miss vinyl though - but I wouldn't swap back now. Jarv

is it easier to learn beatmatching on CDJ then on a TT? or is it because u use the BPM indicators on the CDJ's? that makes it so simple even a deaf child can learn it

quote:

Originally posted by DJ Z This is a video of me mixing that shows the pacing of beat matching, crossfading, etc...may help. YouTube: DJ Z Mixing Walk-Through

im Dutch, so what does 'flange' means?

btw, do u have a dildo in ur pants? your trousers are shaking a bit .... just kiddin, nice vid. although its not easy to see what ur doing, apart from the red letters telling what u do when. its hard to see anything.