Become a part of the TranceAddict community!Frequently Asked Questions - Please read this if you haven'tSearch the forums
TranceAddict Forums > DJing / Production / Promotion > DJ Booth > Using an external usb soundcard for recording
  Last Thread   Next Thread
Share
Author
Thread    Post A Reply
minski
Senior tranceaddict



Registered: Sep 2005
Location: Melbourne, Australia
Using an external usb soundcard for recording

Just picked up this AVE PL05U USB External Soundcard from dj gear shop
SITE

I bought it with the intention of using it to record from my decks into my laptop to bypass the laptops own line-in which suffers from big feedback issues where it picks up the hard drive noise etc.
Im having some trouble with the settings though, see it didnt come with a manual. Ive got the RCA from my Vestax VMC-002 Record Out line, into the Soundcard's PREAMP/PHONO LINE IN, then with the USB connection going into my laptop.

Though Im getting very different results with trying to record into sound forge. Anyone know what the best settings on the soundcard box would be? In terms of should it be set to LINE or PHONO, USB or EXTERNAL, and should the filter be FLAT or CUT?

cheers folks

Old Post Dec-27-2007 00:29  Australia
Click Here to See the Profile for minski Click here to Send minski a Private Message Visit minski's homepage! Add minski to your buddy list Report this Post Reply w/Quote Edit/Delete Message
T-Soma
The Sky Was Pink...



Registered: Oct 2004
Location: Chair

Well, since your using your mixers Line Out you should be using your soundcards Line In. Sounds all a little too obvious now?

The safe bet is to just leave the filter of flat but cut might not be too bad because it will probably just cut out sub freqs that are no benefit to your end result.

Old Post Dec-27-2007 04:45  Australia
Click Here to See the Profile for T-Soma Click here to Send T-Soma a Private Message Add T-Soma to your buddy list Report this Post Reply w/Quote Edit/Delete Message
minski
Senior tranceaddict



Registered: Sep 2005
Location: Melbourne, Australia

quote:
Originally posted by T-Soma
Well, since your using your mixers Line Out you should be using your soundcards Line In. Sounds all a little too obvious now?

As I said the mixer line out is already hooked up to the soundcard's line in, it's the settings on the front of the soundcard Im confused about.
Cheers for the advice on the filter

Old Post Dec-27-2007 07:30  Australia
Click Here to See the Profile for minski Click here to Send minski a Private Message Visit minski's homepage! Add minski to your buddy list Report this Post Reply w/Quote Edit/Delete Message
skip
a.k.a. skip2



Registered: Sep 2002
Location: home or somewhere else

put the input switch on line, filter on flat, power on usb if you don't want to use an external power supply and don't have any problems with powering the card thru usb.


___________________

Get Dropbox, with 250 MB extra space!

Old Post Dec-27-2007 17:03  Finland
Click Here to See the Profile for skip Click here to Send skip a Private Message Add skip to your buddy list Report this Post Reply w/Quote Edit/Delete Message
minski
Senior tranceaddict



Registered: Sep 2005
Location: Melbourne, Australia

cheers!
just what i needed, thanks again

Old Post Dec-28-2007 00:34  Australia
Click Here to See the Profile for minski Click here to Send minski a Private Message Visit minski's homepage! Add minski to your buddy list Report this Post Reply w/Quote Edit/Delete Message
Grant Symons
tranceaddict in training



Registered: Jan 2008
Location: sydney australia
PL05U analogue to digital processor

I also bought PL05U from DJ store, but cannot get clean signal.
I take a signal from my main analogue amplifier adaptor sockets, RCA out, and connect to PL05U Phono/line In, but the sound (on headphones) is badly distorted.

I tried taking signal direct from phono turntable but that doesn't work either.

I am getting contradictory advice. Have you any suggestions for the correct hookup.

Really need advice. Tks

Old Post Jan-11-2008 09:02  Australia
Click Here to See the Profile for Grant Symons Click here to Send Grant Symons a Private Message Add Grant Symons to your buddy list Report this Post Reply w/Quote Edit/Delete Message

TranceAddict Forums > DJing / Production / Promotion > DJ Booth > Using an external usb soundcard for recording
Post New Thread    Post A Reply

 
Last Thread   Next Thread
Click here to listen to the sample!Pause playbackUnknown awesome track #2 [2013] [0]

Click here to listen to the sample!Pause playbackM-Traxx - "Summer Love" [2004]

Show Printable Version | Subscribe to this Thread
Forum Jump:

All times are GMT. The time now is 22:26.

Forum Rules:
You may not post new threads
You may not post replies
You may not edit your posts
HTML code is ON
vB code is ON
[IMG] code is ON
 
Search this Thread:

 
Contact Us - return to tranceaddict

Powered by: Trance Music & vBulletin Forums
Copyright ©2000-2026, Jelsoft Enterprises Ltd.
Privacy Statement / DMCA
Support TA!