hi all

im thinking bout gettin a pair of the 1200 mk2s. Best price i've found so far is 400 each. Does anyone know a place where i could get it for cheaper??? Also...wat mixer do u guys recommend for a beginner? As well as cartridges. I heard some needles will screw up ur vinyls faster than other but i dont know.


Thanks

First off you can find 1200 MD3's for about $400 a piece so you might as well pick those up instead of MK2's. If your a beginner and your starting out with tecknics you might as well get a nice mixer to go along with those tables. You could get a Vestax 275 for about $360 unless you want to drop like over a GRAND on a mixer.

As far as different needles screwing up your vinyl faster, it's not the type of needle, it's how it is set up on the deck. (height, weight, etc)

___________________
Trance...a state of mind.

I was blessed with a deal for 2 MD3's and a (crappy) American DJ mixer, with all that goes with it, all virtually brand new!!!.....$700

___________________
Ths Cosmic Vortex

whats the best place to pick up a new pair of tables? n the M3d's only difference from the MK2's is the pitch reset button n lowered on off switch? i don't think i'd ever use the reset feature..maybe i'm just not educated in how it's used creatively? any insight on where to get them and the question is very much appreciated so thanks in advance.

___________________
Music isn't a way of life...it is life

Below is the bottom line difference between all the Technics models.

1200 MK2 -- Original
1210 MK2 -- Original + Black color instead of silver
1200 M3D -- Original + Reset button + Lowered power switch + Slipmat

You may not use the reset button much but the M3D doesn't have the notch at 0% pitch like the MK2 does. I find it hard to fine tune pitch when the track is a fraction above and below 0% because of that notch. The MK2 does not come with slipmats so that's another $20 for a pair.

Generally the M3Ds are $50 USD more expensive than the MK2s. MK2s usually sell around $400USD.

A buying tip is, find the cheapest equipment you can find and then goto pssl.com and ask for a price match. They have a 110% price guarantee that states they will take off 10% from the price if you find a better price. There are a few rules (of course) but it's not too strict. I use 123dj.com for a lot of the cheapest prices.

I got PSSL to price match and got M3D's for $395 each.

___________________
Trance...a state of mind.

wat a gyp, they sell mk2's in australia for $975 aussie dollars (nearly 500 usd)... and m3d's for $1050 (about 500 usd) i wonder if i could get them ne cheaper in australia... or is there an american site that ships overseas, which can beat that price???

___________________
under construction

Yes you are being screwed.
Light & Sounds has Mk2's for $999 fully loaded w/flight case.
Standard prices (in Sydney) are about $850 Mk2's fully loaded and $950 Mk3's fully loaded.
I wanted Ortofons with my decks so I bought Mk3's for $900 without stylus + cartridge.
I now wish I had bought them fully loaded as I've snapped a needle and have nothing to use until my pay cheque clears. NOT HAPPY!

lol, thanx man... i knew they were a tad expencive... luckily i havn't bought em yet, so itz all good... on the site it says $1225 is about the retail price... i thought that was pretty suspect, i need 2 do more research now... does that shop ship to brissie?

___________________
under construction

I know what you you mean. I spent AGES checking everywhere for exactly what I wanted at the best price.
My suggestion, go to this web site:

http://www.djbasement.com

It's Australian and is a good indicator for what the real RRP is and it has an extensive range of equipment.
I'm not sure how much P&H is because I didn't get mine from there.
I'd suggest you do what I did and go to one of the larger DJ shops in Brisvegas, give them the price and URL of DJ Basement and tell them to look it up and match it. If they don't, go to another store.

i'm also interested in bying tt's, but is there a shop shipping equipment to europe ? anyone know an on-line shop in europe (with decent prices)?

help would be appreciated...

the lowest new price I've seen was 400

Got mine for 275 a piece from ebay and cases where an extra 30 bucks......was the dude second time posting them and wanted to get rid of them so I got them really cheap.....

___________________
The Friday Night Backspin - 90.9 FM 6-10 PM
My Website
WTB--Favorite/WTB Vinyl:

1.Baby Anne- Version 5.1
2.Silicone Works- Daylight (Breaks)


Please PM me if you have these.