 |
|
|
|
 |
DJ RANN
Supreme tranceaddict
Registered: May 2001
Location: Hollywood....
|
|
|
Feb-02-2011 02:18
|
|
|
 |
 |
Looney4Clooney
Supreme tranceaddict

Registered: Apr 2010
Location:
|
|
|
Feb-02-2011 02:31
|
|
|
 |
 |
cryophonik
Boom shanka

Registered: Jan 2008
Location: Elk Grove, CA USA
|
|
|
Yeah, what Eric said. It might also help to think of the parameters as sources and destinations. A modulation source is the parameter that is modulating (having an effect on) another parameter (i.e. the destination). Depending on the synth, the destination can usually have more than one source modulating it. For example you could have both an LFO and an envelope modulating the filter cutoff frequency individually and in parallel (the arrows point from the modulation source to the destination):
LFO > Filter Cutoff Frequency
and
Envelope > Filter Cutoff Frequency
Or, you could have one (or more) modulation source modulating another parameter that is modulating the final destination in series, in which case the middle parameter is both a destination and a source, as in:
Envelope > LFO > Filter Cutoff Frequency
You could have the same settings for all parameters in both scenarios, but end up with much different sounds just based on the manner in which they're configured.
Edit: after re-reading Eric's post a little slower, I realize that I just pretty much said the same thing he did, except I used "destination" rather than "target". Oh well, hopefully this still helped somewhat.
___________________
cryophonik.com | facebook | soundcloud
Sonar Platinum | Ableton Live 9 | Logic Pro X | Access Virus TI2 Keyboard | Kurzweil PC3X | Nord Lead 4R | NI Maschine
Last edited by cryophonik on Feb-02-2011 at 04:04
|
|
Feb-02-2011 03:55
|
|
|
 |
 |
cryophonik
Boom shanka

Registered: Jan 2008
Location: Elk Grove, CA USA
|
|
|
| quote: | Originally posted by LoveHate
yeah im a newb..what can i say.. ...
thanks eric, still a bit confused but that made it alot more clear.
|
Don't be afraid to ask. This isn't knowledge that you're born with and, despite the impression that many people try to give here, you're not the only one who doesn't have a good grasp on synthesis.
One thing I'll mention is that, even though I love Twin 2, I might suggest learning on a different synth with a more conventional modulation matrix. The only reason I mention this is because Twin 2 has a sorta unconventional way of doing things, particularly modulation, that you might find difficult to apply to other synths. That said, if you're most familiar and comfortable with that synth, then just go with it.
___________________
cryophonik.com | facebook | soundcloud
Sonar Platinum | Ableton Live 9 | Logic Pro X | Access Virus TI2 Keyboard | Kurzweil PC3X | Nord Lead 4R | NI Maschine
|
|
Feb-02-2011 04:11
|
|
|
 |
 |
aNYthing
Abrasive Cockhead @ Large

Registered: Dec 2005
Location: Near metric fuck-a-ton of high-end gear
|
|
|
| quote: | Originally posted by cryophonik
Don't be afraid to ask. This isn't knowledge that you're born with and, despite the impression that many people try to give here, you're not the only one who doesn't have a good grasp on synthesis.
One thing I'll mention is that, even though I love Twin 2, I might suggest learning on a different synth with a more conventional modulation matrix. The only reason I mention this is because Twin 2 has a sorta unconventional way of doing things, particularly modulation, that you might find difficult to apply to other synths. That said, if you're most familiar and comfortable with that synth, then just go with it. |
he should try Access Virus... it only has what... 100+ parameters 
LOL
In a nutshell, as other pointed out - it's essentially a signal doing something. Don't beat me too hard, all y'all purists, but when you flip a light switch, you're modulating a lightbulb.
If you had an outlet wired to that switch as well and say you had a printer hooked up to it, every time you flipped light switch on (like I have in my library), it turns printer on along with light.
I now have a single signal source (light switch) and two destinations - light bulb and printer.
That's a 50K Ft view of the concept.
(source - > target)
___________________
Lasciate ogne speranza, voi ch'intrate
|
|
Feb-02-2011 04:40
|
|
|
 |
 |
Looney4Clooney
Supreme tranceaddict

Registered: Apr 2010
Location:
|
|
|
Feb-02-2011 05:03
|
|
|
 |
 |
cryophonik
Boom shanka

Registered: Jan 2008
Location: Elk Grove, CA USA
|
|
|
So, this might add a little more confusion but I think it's important to talk about the role that "controllers" play in modulation. Controllers are essentially features that give you real-time (or automated) control over the way that a source modulates a destination(s). They usually include parameters like velocity, aftertouch, mod wheel, breath controllers, some foot pedals, etc. They're usually used to control the amount of effect that a source has on a given destination.
A common example is using velocity to determine how much effect an envelope has on the cutoff frequency - when a note is played softly (i.e., low velocity), the envelope has little effect on the filter so it sounds more muted, whereas notes played with higher velocities cause the envelope to have a greater amount of effect on the cutoff (i.e., open more), thereby creating a brighter sound. So, generally speaking, controllers are useful for adding expression and variation, and even add more realism in some cases.
IMO tasteful use of control parameters for modulation is one thing that sets most pro sound designers apart from the rest - adding in some control with the mod wheel, velocity, and/or aftertouch can really add a lot of expression, diversity, and dynamics to your sounds.
___________________
cryophonik.com | facebook | soundcloud
Sonar Platinum | Ableton Live 9 | Logic Pro X | Access Virus TI2 Keyboard | Kurzweil PC3X | Nord Lead 4R | NI Maschine
|
|
Feb-02-2011 05:54
|
|
|
 |
All times are GMT. The time now is 00:45.
Forum Rules:
You may not post new threads
You may not post replies
You may not edit your posts
|
HTML code is ON
vB code is ON
[IMG] code is ON
|
|
|
|
|
|
Contact Us - return to tranceaddict
Powered by: Trance Music & vBulletin Forums
Copyright ©2000-2026, Jelsoft Enterprises Ltd.
Privacy Statement / DMCA
|