yes, you by increasing the gain , you are changing the threshhold

___________________
"This is why Superman works alone." GC
old stuff from days gone by (2001-2004)
Mad For Brad's gay little contest

What if the threshold is the same?

___________________

quote:

Originally posted by dj_alfi change your avatar for fucks sake.

if 10 dBfs triggers the limiter, an your original signal is 15 dBfs , increasing your signal prior by 5dB will now trigger the limiter. Now if you limit your 15 bfs signal with the initial threshold, you will get no limiting and you will then increase the gain essentially doing no limiting. threshhol and input gain are affect each other. Many compressors dont' have thresholds, the gain controls how much is compressed.

___________________
"This is why Superman works alone." GC
old stuff from days gone by (2001-2004)
Mad For Brad's gay little contest

For 2 bus limiting and channel limiting, is it better to drive the signal to the limiter threshold?

___________________

quote:

Originally posted by dj_alfi change your avatar for fucks sake.

it is always better to have a hot signal and limit that then to artificially raise the gain which will also raise the noise floor.

___________________
"This is why Superman works alone." GC
old stuff from days gone by (2001-2004)
Mad For Brad's gay little contest

quote:

Originally posted by Looney4Clooney it is always better to have a hot signal and limit that then to artificially raise the gain which will also raise the noise floor.

All right, cool. Thanks.

___________________

quote:

Originally posted by dj_alfi change your avatar for fucks sake.