 |
|
|
|
 |
Lith
Senior tranceaddict
Registered: Jan 2003
Location: US
|
|
|
So you are saying the hardware does come into play? I mean with just the recording option built-in.
I figured you had to output the sound somehow in order for that to occur, but I wasn't sure how Traktor made use of the DACs.
|
|
Nov-05-2011 21:25
|
|
|
 |
 |
Lith
Senior tranceaddict
Registered: Jan 2003
Location: US
|
|
|
To answer both your questions, I use an external card built in to my controller. But, I was under the impression Traktor would ignore it when using the recording function within the program?
The monitor outputs don't clip nor distort, but if I run into the red on the master output meter within Traktor, the wav file will start distorting.
My thought was that it was bypassing the sound card and doing everything internally? So, it didn't matter what you were connected with. So, I don't think it's the tracks, since they don't clip, but when the gain is turned up, you can push them into that realm.
It just seems the signal path in Traktor can't use an external sound module for more than an output to another program or device? Perhaps 2.0 can?
|
|
Nov-19-2011 09:21
|
|
|
 |
 |
chewy dragee
Senior tranceaddict
Registered: Jun 2009
Location: Your mom's house
|
|
|
What pray tell is a Traktor/Xone S4?
|
|
Nov-25-2011 11:42
|
|
|
 |
 |
DJ RANN
Supreme tranceaddict
Registered: May 2001
Location: Hollywood....
|
|
|
Hold on thar....
If you're recording internally (and I have no way of knowing if you are or not) and then you clip the channels inside traktor, then yes, your wav will be clipped. It will then sound like shit when you play it.
The answer is to not clip in traktor and have your gain staging set so that you have some headroom before you clip but that it also sounds nice on your monitors.
If you really want to get fancy you could calibrate your system to K-18, meaning that your ears would bleed before you ever clipped, but really the solution is to make sure that traktor does not clip and adjust your soundcard/controller/speakers output so it's loud enough for you.
Don't forget, even if it's a little quiet as a recording (wav) you can always just raise the volume as an offline process later.
|
|
Nov-25-2011 21:14
|
|
|
 |
 |
Lith
Senior tranceaddict
Registered: Jan 2003
Location: US
|
|
|
I think last two posts might be what I'm referring to most.
Trying to clarify further--I was trying to find out if the hardware you're using comes into play at any point in the signal when recording within Traktor itself (using its own record function).
I don't see how, but there are hardware configs out there where that could occur. Traktor does not seem to operate that way to me, but was looking for confirmation.
I can't see where the hardware would be feeding back into the signal path in Traktor's internal record mode? None of the settings indicate as such.
The possibility was there, with its USB configuration using combo MIDI/audio controllers. That's what motivated the original question. Hopefully it's more clear, but I think I've got the answer I need.
|
|
Nov-30-2011 05:02
|
|
|
 |
All times are GMT. The time now is 21:15.
Forum Rules:
You may not post new threads
You may not post replies
You may not edit your posts
|
HTML code is ON
vB code is ON
[IMG] code is ON
|
|
|
|
|
|
Contact Us - return to tranceaddict
Powered by: Trance Music & vBulletin Forums
Copyright ©2000-2026, Jelsoft Enterprises Ltd.
Privacy Statement / DMCA
|