the link is not working

It's working now.

(stupid ISPs)

have u tried cleaning the contacts on ur tonearm & trackmasters?

maybe try some gruv glide for ur rekz...couldnt hurt

maybe check the "high" settings on ur mixer

i do hear it though

damn that sounds like shit dude

have you tried turning the gains down on your mixer if they're really high, and turning up the main volume instead?
sometimes the sound will be distorted because people crank the gains thinking its the same thing as volume...which it isn't

i suggest what liquid said, clean the connection between the tonearm & needles

also check the wires coming from your tables to the mixer

your needles should last you a hell of a long time
i have trackmasters myself...
ive had them since feb. and they are still working perfectly...spinning about 7 hours a week
if your'e just spinning at home...put your counterweight very very light so the needles have nearly no pressure on your vinyl...it saves your needles and vinyls...
and honestly whocares if the needle skips once or twice while practising at home?

ps - the dotnl remix of cry is so much better

Thanks guys. Unfortunately, i've tried everything you mentioned. EQ is set at 12 oclock on all knobs, channel fader volume is at max, the gain is set so that the leds are bouncing just at the Odb mark.

I use 1.5G of tracking on my needles, with the antiskip also at 1.5. that's about as low as i can get it without the needle skipping.

occasionally, when recording a mix, or spinning at a party, i crank the weight up to 2 - 2.5 and turn the antiskate off, just to ensure the needles don't skip.

all the wires and connections are perfect and working great, nicely snug.

the only thing i HAVEN'T tried is checking the connection between the tonearm and the needle, but, i don't think that's it. wouldn't that give me all around bad sound, not just on the S sounds? I know that the S sound is a high frequency, and i'm thinking my needles just don't pick up that frequency well.. but then why do other peoples?

And, i've tried switching stylus to the brand new one in the box, and it's a little better but still pretty bad.

can i get better stylus, without buying the whole cart again?

BTW, i know the dotNL mix is better, i can't find it on vinyl, do you know where to get it?

i got mine from a local record shop...
however unless i have the memory span of a rock...i believe its on Essential Records
and has an orange cover

did you record that sample straight from the mixer - computer? or from your amp - computer?
it could be a problem with your amp if its the latter

when you listen to the track in your headphones from your mixer do you still get that distorted sound?

quote:

Originally posted by Kid Lax i got mine from a local record shop... however unless i have the memory span of a rock...i believe its on Essential Records and has an orange cover

hmm.. thanks, i'll look around.

quote:

Originally posted by Kid Lax did you record that sample straight from the mixer - computer?

mixer into MD player (no compression applied), then into computer as a wave file, using soundforge, then converted to mp3 using lamemp3.

maybe the distortion comes in there somewhere?

but, i've had no problems with anything, and i've recorded tons of stuff like this.

[/QUOTE]

quote:

Originally posted by Kid Lax when you listen to the track in your headphones from your mixer do you still get that distorted sound?

yes, and just the same on the MD after recording.

quote:

Originally posted by JohnSmith They seem pretty goood, but already, the highs are starting to sound hissy, especially the S sounds in vocals, it's really annoying me.

I swear there was a thread about the S hissing sound a while ago. It's due to the fact of how the record was recorded. If it was recorded in that particular way the S sounds make it sound fucked. So I am assuming it's not your needles.

___________________
tech-house
n. an old-school term for crack cocaine.
"Got some tech-house?" "Yeah, I'm your man for tech-house, Grandma."
http://thesurrealist.co.uk/slang.cgi?ref=tech-house

Yes, i know. but, it's not just this vinyl. It's all my ones with this sound, and i can hear the hissing in all sorts of high frequency sounds if i listen for it.

Can anyone help me? I don't think i need to shell out $500 for ortofons, when i have already paid $300 for Stantons, but this hissing is driving me crazy!

is it just on one turntable or both?
of not, then try switching the tables or something

you said it was on all the records?
then try cleaning the contacts between the tonearm and the cart with some rubbing alcohol

quote:

mixer into MD player (no compression applied), then into computer as a wave file, using soundforge, then converted to mp3 using lamemp3. maybe the distortion comes in there somewhere? but, i've had no problems with anything, and i've recorded tons of stuff like this.

does the sound come up when playing normally, through the speakers or headphones?
if not, then it could be a recording problem


ummm... give a litle more detail, like how you have your system set up and that sort of thing, and i can help you troubleshoot this

it's just a matter of going through every single possible thing and finding out where exactly the problem is

___________________
Tony Morello Dot Com
Soundcloud
Facebook
Twitter
The Drunken Monkey Podcast
The Mixdown Podcast presented by Tony Morello