It might also be the output cables it might just have started outputting in mono.

it could have something to do with your cart, have you checked to make sure all of its connections are spot-on?

i had this problem a few months back...

it turned out that the wire connections between the tonearm and the cartridge were loose. so it could be that- try tightening them up.

Yeah, this has happened to me before and it is the cartridge. This is what you gotta do: unscrew it, and lick (belive or not) the back four gold dots. Just put into your mouth and lick it as if you were sucking on the tip of your thumb. This usually clears the static. Then, just screw it back on tightly and TA-DAH! Just a cool DJ trick I learned while playing at my first live gig.

___________________

Like Psiweaver said, don't discard the RCA outputs as a source of the problem. If it does turn out to be that, there was an earlier thread that had a link explaining exactly how to replace the RCAs.

___________________
Helping girls make bad decisions since 1979

haha
ok thanx..il eat out my cartridge tomorow when i get it back from my friend..il tell u how it went

quote:

Originally posted by dRale haha ok thanx..il eat out my cartridge tomorow when i get it back from my friend..il tell u how it went

dont leave out the nasty details

___________________
| Download LIVE WNUR 89.3fm Set | bio

I would suggest NOT licking it, but instaed using isopropyl alcohol

saliva leads residue, which can compound the problem
Alcohol does not, it evaporates quickly.


I would take a Q-tip, soak it in alcohol, then clean INSIDE the tonearm, pushing into the 4 contacts. As well, wash the contacts on the cart with teh alcohol. let it dry, then re assemble.

___________________
Retired TA.

yes, as someone just said, licking is not really that much of a good idea, down the long run.

___________________
check out my guest mix for OndaSonora Podcast (aug.2009)

hm i think the problem is a loose wire or someting..cause i cleaned it with alcoohol but still didn't help
where might the wire problem be?

If you could find a way to bring it to me, I can pop it open and fix/replace any parts that might be loose or broken!

___________________

'-.SgtFoo.-'
My SoundCloud