Become a part of the TranceAddict community!Frequently Asked Questions - Please read this if you haven'tSearch the forums
TranceAddict Forums > DJing / Production / Promotion > DJ Booth > Gonna make TT stand. Please look at these pc-made previews and tell me what you think
Pages (2): [1] 2 »   Last Thread   Next Thread
Share
Author
Thread    Post A Reply
Andrew K
Junk Science



Registered: Aug 2001
Location: Salonica, Greece
Gonna make TT stand. Please look at these pc-made previews and tell me what you think





*****************************************





which one do you prefer..? any comments-suggestions?


___________________
www.andrew-k.com

Old Post Jul-31-2002 08:52  Greece
Click Here to See the Profile for Andrew K Click here to Send Andrew K a Private Message Visit Andrew K's homepage! Add Andrew K to your buddy list Report this Post Reply w/Quote Edit/Delete Message
Lanithium
Epic! =)



Registered: Apr 2002
Location: Perth, Australia

you have alot of time on you hands dont you? :P

hehe

they look good, but i wouldnt like my speakers down at my feet.. plus i wouldnt have them on the top one as they'd be sitting on the table bottom causing vibrations yeah?

i prefer to have my speakers infront/side of me at around shoulder level...

but yeah they look good.. :P

Old Post Jul-31-2002 10:21  Australia
Click Here to See the Profile for Lanithium Click here to Send Lanithium a Private Message Visit Lanithium's homepage! Add Lanithium to your buddy list Report this Post Reply w/Quote Edit/Delete Message
Andrew K
Junk Science



Registered: Aug 2001
Location: Salonica, Greece

actually I am gonna have the speakers there for a short period of time... later I am gonna move the whole table in my studio, so this won't be a prob Then I will use this space for my vinyl bags...

and about the time...
I will order them, not make them
They are cheaper than I though (total cost about 100euros)

Also check the following pics about my kaoss
I think this will look great! (and it's easy/cheap to construct)


___________________
www.andrew-k.com

Old Post Jul-31-2002 10:48  Greece
Click Here to See the Profile for Andrew K Click here to Send Andrew K a Private Message Visit Andrew K's homepage! Add Andrew K to your buddy list Report this Post Reply w/Quote Edit/Delete Message
Andrew K
Junk Science



Registered: Aug 2001
Location: Salonica, Greece




I think ^^ this is better...


___________________
www.andrew-k.com

Old Post Jul-31-2002 10:50  Greece
Click Here to See the Profile for Andrew K Click here to Send Andrew K a Private Message Visit Andrew K's homepage! Add Andrew K to your buddy list Report this Post Reply w/Quote Edit/Delete Message
blighty
Still in love with trance



Registered: Oct 2000
Location: Nijmegen, Holland

Hi mate,

I think it's not high enough .It's just 75 cm from the ground.I don't know how tall you are but I think this is not the correct height. I have it on 85 cm, and it's perfect.

Greetings,
Blighty


___________________


http://www.blighty.nl

Old Post Jul-31-2002 22:07  Netherlands
Click Here to See the Profile for blighty Click here to Send blighty a Private Message Visit blighty's homepage! Add blighty to your buddy list Report this Post Reply w/Quote Edit/Delete Message
Sinonick
Senior tranceaddict



Registered: Jul 2002
Location: athens - greece

you're using your fingers for the kaoss pad right ? don't you think it's going to be inconvenient to have it behind the table ? you 'll have to stretch your arm in order to use it, so it won't be easy to use your fingers on the touch pad. i think it would be better somewhere where you arm won't be stretched.next to the mixer or in ftont of it would be perfect (if there is space of course).

the first one is better i think, and i'll agree with blighty and lanithium, it is a little too short + speakers under the table really suck... you'll notice by yourself when you'll place your stuff on the table.

looks pretty cool though, are you going to build this on your own ? it sure will take much of an effort...

take some pictures of this when you're done, and some pictures of the studio too, it's pretty interesting watching other people's ideas.

& in case not everybody in here speaks greek, the blue things drawed on the table are holes, "Trypa=hole"


___________________
Allways keep your friends close, and your enemies closer

Old Post Jul-31-2002 22:37  Greece
Click Here to See the Profile for Sinonick Click here to Send Sinonick a Private Message Add Sinonick to your buddy list Report this Post Reply w/Quote Edit/Delete Message
Dj Flesch
Supreme tranceaddict



Registered: Aug 2001
Location: Indianapolis, USA

If I was you, I wouldn't make a whole station for all of the items that you have it made for. I would make a TRANSPORTABLE X-stand for my cd/turntables and mixer and then hook the rest up on your desk or something. This way you can move your dj eq to the next party/club that you go to, or at least may dream of going to . I like my decks and mixer high, I have mine set for 94cm on the top of my x stand/bottom of my case and 109cm for the top of my case/decks/mixer. I know it's a bit tall, but I'm also 6'3" (191cm).

I also think that it's a very bad idea to even make room for the speakers, even if it is temporary, the speakers will not only vibrate the whole table you want to build, but you won't be able to hear crap from them! The music will be projected right past you unless you have some increadible ear-foot coordination! Then it will bounce of the walls and you will hear a delayed beat. Get speaker stands and put them infront of you from the begining.

The next, and probably most important part, is to leave room for heat! Your amp will generate a lot ot heat and so you best make extra room and vents with fans for it if you are not going to have a top port (because heat rises) to allow for cooling. Your turntables won't generate that much heat, but you mixer will though, and so you have to allow room for heat dissipation for that also!

I'd suggest you go for something that is on the market already because they have engineered these things into the stand. I was having a problem with getting a stand that could hold my case for my mixer and cd decks, while allowing for me to upgrade my setup with a pair of turntables while not making me buy or build onto my existing stand. I found one with arm bars that extend above the main platform. Check out Quiklok stands! That's the one that I got, and I'm very happy with it!

Old Post Jul-31-2002 23:08  United States
Click Here to See the Profile for Dj Flesch Click here to Send Dj Flesch a Private Message Add Dj Flesch to your buddy list Report this Post Reply w/Quote Edit/Delete Message
Andrew K
Junk Science



Registered: Aug 2001
Location: Salonica, Greece

hey, thanks for your time and suggestions
let me answer to some things
@ blighty : I guess you are right... I am gonna make it 85cm...
@ Sinonick : The pad won't be behind the deck... It will actually be above the mixer I will post a little jpg later to understand.
@ Sinonick : No, I will order it
@ Sinonick : Sure I will photograph it
@ Dj Flesch : I will never take these out of my home So I want something stable...
@ Dj Flesch : Well actually I won't pump the speakers since I have had some problems with police in the past, so I don't vibrations will be a problem... I am seriously thinking of it though... I can't buy speaker stands now, cause the whole station will be in the living room (lol) and my parent's won't let me convert it to a club
@ Dj Flesch : My amp is 13cm and I have left space for 20cm... don't you think this is enough? Besides, I will only use it for about 2/3 hours/day...


___________________
www.andrew-k.com

Old Post Aug-01-2002 08:35  Greece
Click Here to See the Profile for Andrew K Click here to Send Andrew K a Private Message Visit Andrew K's homepage! Add Andrew K to your buddy list Report this Post Reply w/Quote Edit/Delete Message
Andrew K
Junk Science



Registered: Aug 2001
Location: Salonica, Greece


___________________
www.andrew-k.com

Old Post Aug-01-2002 08:37  Greece
Click Here to See the Profile for Andrew K Click here to Send Andrew K a Private Message Visit Andrew K's homepage! Add Andrew K to your buddy list Report this Post Reply w/Quote Edit/Delete Message
jdat
Jay Van Dat



Registered: Oct 2001
Location: I dont even know

quote:
Originally posted by Lanithium
you have alot of time on you hands dont you? :P

hehe

they look good, but i wouldnt like my speakers down at my feet.. plus i wouldnt have them on the top one as they'd be sitting on the table bottom causing vibrations yeah?

i prefer to have my speakers infront/side of me at around shoulder level...

but yeah they look good.. :P



I suggest having the speakers on the sides at the same height as your kaos pad

Old Post Aug-01-2002 16:16 
Click Here to See the Profile for jdat Click here to Send jdat a Private Message Add jdat to your buddy list Report this Post Reply w/Quote Edit/Delete Message
Sinonick
Senior tranceaddict



Registered: Jul 2002
Location: athens - greece

quote:
Originally posted by jdat



I suggest having the speakers on the sides at the same height as your kaos pad


what the fuck do speakers have to do with kaoss pad???

just being curious!
no offence


___________________
Allways keep your friends close, and your enemies closer

Last edited by Sinonick on Aug-01-2002 at 16:55

Old Post Aug-01-2002 16:35  Greece
Click Here to See the Profile for Sinonick Click here to Send Sinonick a Private Message Add Sinonick to your buddy list Report this Post Reply w/Quote Edit/Delete Message
Andrew K
Junk Science



Registered: Aug 2001
Location: Salonica, Greece

quote:
what the fuck do speakers have to do with kaoss pad???

i guess nothing...
yeah, the same height would be great... just next to my ears
but this will happen once I move the whole station in my studio

btw : sinonick, thes na se valo ston xarti?


___________________
www.andrew-k.com

Old Post Aug-01-2002 16:45  Greece
Click Here to See the Profile for Andrew K Click here to Send Andrew K a Private Message Visit Andrew K's homepage! Add Andrew K to your buddy list Report this Post Reply w/Quote Edit/Delete Message

TranceAddict Forums > DJing / Production / Promotion > DJ Booth > Gonna make TT stand. Please look at these pc-made previews and tell me what you think
Post New Thread    Post A Reply

Pages (2): [1] 2 »  
Last Thread   Next Thread
Click here to listen to the sample!Pause playbackArmin van Buuren - live on SlamFM 002 27-01-2005 (GAS Sydney NYE 2005) [2005] [2]

Click here to listen to the sample!Pause playbackSharam - "The One" [2007]

Show Printable Version | Subscribe to this Thread
Forum Jump:

All times are GMT. The time now is 15:42.

Forum Rules:
You may not post new threads
You may not post replies
You may not edit your posts
HTML code is ON
vB code is ON
[IMG] code is ON
 
Search this Thread:

 
Contact Us - return to tranceaddict

Powered by: Trance Music & vBulletin Forums
Copyright ©2000-2026, Jelsoft Enterprises Ltd.
Privacy Statement / DMCA
Support TA!