they mean if you turn up the volume too loud and blow it, it won't be covered under their warranty. BTW The driver is simply the speaker, and the tweeter is the speaker that produces higher frequencies.
IF you can, buy your gear from Guitar Center. They'll pricematch any lower price from a authorized dealer, and they have "performance garantee" plan you can pay when you buy the speakers in case you break them within 1-3years.
___________________
quote:
Make it idiot proof and someone will make a better idiot.
He who laughs last thinks slowest!
May-24-2004 03:39
broken silence
Senior tranceaddict
Registered: Jun 2003
Location: In a gear shop, somewhere
Hey chex
My cables are 9 feet long dual - hosa's...worked like a charm since the day I got the m1s. I avoided powersupplies and cords when I hooked em up last..
May-24-2004 03:49
dj chex
A monkey without a cause
Registered: Mar 2004
Location: denver co
that's probably why you had good luck with them. I've noticed problems seem to happen more when you have amps/speakers all on the same circuit or surge protector. BTW I think hosa cables are pretty nicely insulated so thats why you had such good luck. You just can't always tell how amps, speakers, mixers, cd players, turntables, mics, instruments, effects processors, and other stuff will act when it's all hooked up. That's why i stress over balanced over unbalanced.
___________________
quote:
Make it idiot proof and someone will make a better idiot.
He who laughs last thinks slowest!
May-24-2004 03:56
nmcog
tranceaddict
Registered: May 2004
Location: UK
How loud is loud?
Last edited by nmcog on May-26-2004 at 03:43
May-24-2004 03:59
dj chex
A monkey without a cause
Registered: Mar 2004
Location: denver co
too loud would be loud enough to distort. A thing you should know about nearfield monitors before you buy: they will sound flat. (flat as in linear reproduction, not flat as in cola) For mixing dance music, people usually want to have lots of bass when listening to it. But for mastering, editing, producing, and recording; you'll want speakers that will sound flat and linear, so you can hear every aspect in the recording, that's what Nearfield studio monitors are for. LISTEN BEFORE YOU BUY. You may want something that has more punchy bass.
___________________
quote:
Make it idiot proof and someone will make a better idiot.
He who laughs last thinks slowest!
Registered: Dec 2002
Location: Deep down in the forest, where no broadband exist..
Got exactly the same model and i would highly recommend them!
I also use them while Dj'ing and the sound is incredible!!
very tight bass! (the way i like it)
May-31-2004 12:32
hooknife
))(())(())((
Registered: Apr 2003
Location: Inside Layer 3
quote:
Originally posted by nmcog
What do you think of the speakers? Recommend them?
I intend to use them 5+ hours per day, everyday but not always loud.
I have had these babys for 5 years and have only replaced one tweeter.
Love these things!
___________________
~ Under the spell of a 303 ~
All you touch and all you see is all your life will ever be.
May-31-2004 15:32
Psiweaver
I DJ 120,000 Massives
Registered: Jul 2003
Location: Culver City United States
Hosa cables are super cheap, they use the cheapsest quality components. If you can go balanced then i would always suggest doing so.
May-31-2004 16:26
nmcog
tranceaddict
Registered: May 2004
Location: UK
So which one of these is the best cable to use:
XLR SOCKET TO 6.35mm MONO JACK:
1/4" Jack to 1/4" Jack 6m:
6.3mm STEREO PLUG TO 2 x RCA PHONO PLUGS:
Neutrik Speakon to 1/4" Jack Speaker Cable:
May-31-2004 19:06
Rememberence_
James Packer
Registered: Oct 2002
Location: HXTA #6
I've got a pair of these, they sound quite decent. I bought them because they were in my price range and I wanted somewhat of a quality speaker setup for listening to music (from vinyl/cd or mp3).
Regarding the cables, I bought XLR (male) to TRS (male) balanced cables.
A male XLR connecter is one with the 3 pins and a large round metal cover surrounding them (3 quarters of an inch or maybe a bit less in diamter).
A male TRS connecter (tip / ring / sleeve) is also a 3 conductor connecter, 1/4 inch in diameter as seen in the pictures above. This is needed for balanced signals, as opposed to a mono 1/4 inch jack which has only 2 conductors and thus can only carry unbalanced signals.
These monitors will accept a TRS connector aswell, but I use XLR connectors on the monitor end of the cables because they lock into the socket and are sturdy. The other end of my cables (TRS) connect to the balanced 1/4 inch outputs on my xone:32 mixer.
___________________
"I played 12.30 til close at 3am at the club (Antro), following on from an Australian dj,
which seemed unusual in deepest Texas." - Judge Jules