quote:

Originally posted by St. Michael Ryan has it covered here. The mixer works like a traditional mixing board minus pan for each channel. Your buses are Mix 1, Mix 2, Booth, and Record. You have two stereo signal sends (Aux 1, Aux 2) and two Aux returns (which have there own eqs!). The aux returns are switchable as mic inputs as well (if both are connected simultaneously you must use XLR inputs for the microphones). You can cue (preview) the effect signal by depressing the cue buttons that are in-line with the mic channels respectively. use the up faders to mix the effect in but use the Aux knobs as your gain/trim. Cables are cables. Basically, try to connect everything balanced that you can unless you have to use RCA connections.

Been said 3 times

___________________