haha. im retarded; i use firefox with text size enlarged, and the wrong values were coming up for components. some ram gets quite expensive when it gets older and goes out of production, i thought this might be a case of that. but no, im retarded.

___________________

quote:

Originally posted by Boomer187 huh?

Is that Fedor, pounding Babalu in your sig?

quote:

Originally posted by Andryuha Is that Fedor, pounding Babalu in your sig?

its fedor pounding cro-cop in my avatar


when fedor fought babalu they couldn't punch to the face on the ground and babalu was doing well.

I wouldn't listen to Cloudburst regarding the need for 2 memory sticks. Running the memory in dual channel probably woun't result in a performance boost you'll be able to detect. However there could be stability problems if you don't used matched pairs.

Your best best would be to buy a single 1GB stick of generic DDR RAM and put that in the slot where your 256 stick is currently located, then move that stick to the first free DIMM slot on your motherboard. You might find that PC3200 is easier to get hold of than PC2700 and this should work fine, you can always run memory slower than it's rated speed.

Also, the reason you currently have 224MB RAM displayed is because your graphics adaptor (probably build into the motherboard) is taking 32MB for itself.

___________________

Last edited by smallSHEEP on Nov-10-2007 at 22:58

quote:

Originally posted by Boomer187 its fedor pounding cro-cop in my avatar when fedor fought babalu they couldn't punch to the face on the ground and babalu was doing well.

i should have known.

YOU GOTTA GET MORE RAM

quote:

Originally posted by tubularbills YOU GOTTA GET MORE RAM

terrible.

___________________

as mentioned installing in pairs is not true. and the whole thing about matched pairs has no effect either. its only good when overclocking for stability issues related to quality control and having similar matched performing pairs.

cloud: this isn't old ass simm memory (might as well lump rambus in there too. rambus is basically a simm on sterroids anyways) so no need for pairs. read up. also dual channel is the only way it should be installed in pairs but only if your going to take advantage of it. something he can't do as his chipset iirc is too old.

___________________

quote:

Originally posted by bas Dual exhaust tips on dual exhaust = QUAD EXHAUST = 300 gain in horsepower. Duh

quote:

Originally posted by bas Undies with a dickhole aren't good for guys. Your balls can get caught in them. That's why I prefer to go over the gate instead of through the fence.

quote:

Originally posted by smallSHEEP Also, the reason you currently have 224MB RAM displayed is because your graphics adaptor (probably build into the motherboard) is taking 32MB for itself.

Yep, having used that mobo in 2 builds, it does have onboard shared graphics.

DDR RAM is expensive now that it's old tech, 2GB will set you back £60ish.

For £66ish you could get:

http://www.ebuyer.com/product/126138
http://www.ebuyer.com/product/115961
http://www.ebuyer.com/product/133379
http://www.ebuyer.com/product/126790

This would be a major upgrade to your whole system

___________________
My Mixes

the only difference in "matched pairs" is that the two sticks have been tested together. its exactly the same ram quality as non matched pairs.

___________________

I also want to upgrade my RAM but I have a laptop and not sure if my laptop can support dual or not, and is RAM different for a laptop?

Here are my specs:
Processor 1 (ID = 0)
Number of cores: 1
Number of threads: 2 (max 2)
Name: Intel Pentium 4 532
Codename: Prescott
Specification: Mobile Intel(R) Pentium(R) 4 CPU 3.06GHz
Package: Socket 478 mPGA (platform ID = 3h)
CPUID: F.4.1
Extended CPUID: F.4
Core Stepping: E0
Technology: 90 nm
Core Speed: 3066.8 MHz (23.0 x 133.3 MHz)
Rated Bus speed: :533.4 MHz
Stock frequency: :3066 MHz
Instructions sets: MMX, SSE, SSE2, SSE3
L1 Data cache: 16 KBytes, 8-way set associative, 64-byte line size:
Trace cache: 12 Kuops, 8-way set associative
L2 cache: 1024 KBytes, 8-way set associative, 64-byte line size:
FID/VID Control: yes
FID range: 14.0x - 23.0x
VID range: 1.116 V - 1.356 V

Motherboard: TOSHIBA EEQ00/EFQ00
Chipset: ATI RS300/RS300m
Southbridge: ATI SB200

Memory: DDR
Module Size: 512 MBytes
Max Bandwidth: PC2700(166 MHz)

Attributes
Number of banks: 2
Data width: 64 bits
Correction: None
Registered: no
Buffered: no
Nominal Voltage: 2.50 Volts
EPP: no
XMP: no