|
First, thanks for sharing Raphie.
However, I just watched the gain staging one and I have beef:
Master peaking at -10dbfs makes no sense to me because.....
1, His reasoning that you should turn up the speakers, will completely fuck your calibrated monitoring system. You have your master set to zero, your speakers calibrated to K(whatever) and you mix your tracks to a preset point somewhere under 0dbfs, to preference - maybe -3dbfs, even -6 if you must, but -10db?
2, He says is you want to make it louder later you gain use the all function in PTHD which is fine, as it has the same effect of mixing to a higher reference under 0dbfs but it's also the same thing as raising the master but again this is bad because of the calibration of your mixing system.
3, He asserts that it only matters in the analogue domain to come in as hot as possible. He's right if everything is in the box - the moment you're using any outboard or mic inputs it completely negates his reasoning, as you will encounter inherent noise floor.
4, Why lower? You're just not using all the available bit depth then?
I'd love to know if I'm wrong.
|