|
| quote: | Originally posted by cryophonik
Is it true that all software sounds warmer and more analogue on a Mac? |
It's just a rumor. But it's a 'created one'. You see, most mac guys know a truck going back to the MacII days. But it only works with certain types of speakers due to the materials used in cone construction.
KRK's get a bad rep because the yellow dye in the cone stiffens it and does not allow the clarity of other monitors. The trick is to find some leather boot treatment. It's a greasy substance that softens the leather. The old Mac guys learned that if you apply it directly to the cone at certain degrees (based on 12 o'clock being 0-360) that the cone softens and then resonates at certain frequencies better than others, giving a sense of movement and a more analogue feel as the cone reproduces the frequency spectrum.
But you'll play hell getting them to give the speaker size equation.
Today, most people I know just use Vaseline on the surround of the cone at the 4, 6, 8 and 12 oclock position. Not too much as then you get a flubby response, but just enough to break down the stiffness in certain areas.
After applying it, let it set for about 72 hours, then set up a sine wave at 15Hz and play it at moderate volume for at least 24 hours to allow the movement/friction to 'work' into the material.
At that point, you'd be hard pressed to tell that anything you put through it wasn't 100% pure analogue.
|