 |
|
|
|
 |
Trance Nutter
........... I got nothing

Registered: Aug 2002
Location: Adelaide, Australia
|
|
|
If you want a break about half way through, once you're into you trance section, just fade the music down to silence. After a couple of seconds (not too long) of silence, hit go on your CD deck (which by coincidience has one of your tracks selected), just let it play, go get a drink or whatever. (I would suggest stepping out of the booth for at least a moment) When that track finishes, a short silence, then have your other track play, continue until you have played all your tracks (like a concert). Let it finish, a second of silence, then start playing tracks and mixing again. Just don't let the silences go too long.
It will give you the chance to have a break and collect yourself, and will really showcase your tracks as being something separate from your mix - it will make them noticable. Not only that but it will give you a short time where you don't have to worry about mixing.
___________________
**Man I'm Pretty**
|
|
Sep-28-2004 05:25
|
|
|
 |
 |
jago
tranceaddict
Registered: Apr 2004
Location: Sheffield
|
|
|
what i'd suggest is get to know your tunes really well, suss out whats goes well with what. Listen to the energy of the songs, and put songs together with simalar energies. When your playing one song line up the other one just before the b of the bang!!!!!!!! Start your second one at the appropiate moment, as one phase ends. Even though u have started the second track, u dont need to touch the x fader or sliders yet, as u need to beatmatch them, get them in sync. Finally at the appropiate moment drop your second tune in. If i were u i'd keep it really simple, dont try to be oakenfold, be yourself and have fun, you'll make mistakes, we all do!!!!!!! Lets us know how u get on!!!!!!!
|
|
Sep-28-2004 13:19
|
|
|
 |
 |
beats and beeps
Guest
Registered: Not Yet
Location:
|
|
|
I normally wouldnt reccomend this...but in your case i think it would be a good idea to use the bpm on the mixer, and cd player (if it has them)
|
|
Sep-28-2004 15:59
|
|
|
 |
 |
nectario
Senior tranceaddict
Registered: Nov 2003
Location: New Jersey, United States
|
|
|
You guys got me pumped now! :-) Well I'll definitely try using the BPM counter of the pioneer DJM600 mixer. Is that thing reliable, though??
I have to say, the kids are pumped to hear me play!
|
|
Sep-28-2004 17:04
|
|
|
 |
 |
benoitfan
Supreme tranceaddict
Registered: Nov 2002
Location: Lisbon, Portugal
|
|
|
Well if you're a producer, I assume you already know basic track structures. As for the BPM counter on the DJM600, it is reliable for effects etc most of the time, but I wouldn't depend on that. DJs don't need beatcounters and Traktor isn't perfect either (I learned on that software 4 years ago, before I moved on to my equipment). However I do think that Traktor is good for learning the basics: EQing, phrasematching, and learning how do 2 tracks' beats together sound like. I have a small tutorial I made around 2 years ago on how to use this software, you can see it here if you like http://members.tripod.com/wrestling_fans0/ . It is sooo outdated lol
I don't advise you to rely on BPM counters; you may get dependent on them and that's not a good thing for sure IMO, and if you start growing a passion for DJing, you'll have to learn how to do it the "real" way anyways... As I said before, I think doing short mixes, 64 beats or so is better, find the right pitch, put it on beat and then don't try correcting it too much, do a quick bass change and that's it. BTW the DJM-600 has a real deep bass cut, can cut ALOT of the track, so try to get used to it before the gig (if you aren't practising with that mixer).
Cheers!
___________________
 
Please visit my website www.djbammer.com and download the monthly mix! Thanks!
|
|
Sep-28-2004 17:43
|
|
|
 |
 |
nectario
Senior tranceaddict
Registered: Nov 2003
Location: New Jersey, United States
|
|
|
Hey thanks! By the way, I have the luxury of telling them what equipment I need.
Do you guys have any better suggestions maybe in terms of equipment? Should I go with a dual cd/mp3 player or two separate cd players?
|
|
Sep-28-2004 17:58
|
|
|
 |
 |
benoitfan
Supreme tranceaddict
Registered: Nov 2002
Location: Lisbon, Portugal
|
|
|
Sep-28-2004 18:01
|
|
|
 |
 |
Inertia
yes.

Registered: Jul 2002
Location: Santo Domingo, Dominican Republic
|
|
|
if you have your pick, i'd say Pioneer CDJ-800s or 1000s. most anyone who learns to spin on a CD deck can spin with these without any trouble. had a friend, who had only spun with his crappy American Audio CDS-1 decks for about 6 months, go up into the DJ booth of the club and give agreat set, flawlessly mixed, and he had never been within 10 feet of a CDJ-1000.
another tip, the faster the music is playing, the easier it is to keep on beat. why? slower tempo means more time between beats, meaning a 64 beat mix at 120BPM will go out of synch faster than a 64 beat mix at 135BPM, because, if you think about it, logically, the one with a faster tempo will be over sooner. this doesn't mean i'm advising you to play as if you were a hardstyle DJ, just something to consider.
___________________
check out my guest mix for OndaSonora Podcast (aug.2009)
|
|
Sep-29-2004 01:05
|
|
|
 |
 |
nectario
Senior tranceaddict
Registered: Nov 2003
Location: New Jersey, United States
|
|
|
Thanks man!
Even though it's for the church youth group, I will aim to deliver a near perfect performance... If I succeed, it will build my confidence... I also think kids will get more excited with trance.. :-) I also think some psy trance will energize them at the end even more..
I did experiment with traktor, and I sadly realized I have pleanty of work ahead of... (trainwrecks and again trainwrecks..) It sounded so bad that I panicked..
This is what I observed though:
1. Psy Trance has smoother transitions for me
2. Vocal trance has the worse transitions...
3. Different songs have more energy than other and going to one with lower energy is sooo noticeable..
One thing I cant seem to understand is eqing. Basically, as I transition to the next track, should I reduce the lows or mids of the next track and then increase them back? I mean the percussion of two trance songs is different and I just don't understand how to make them match...
One more thing: I have no equipment as of now... oh well...
|
|
Sep-29-2004 19:14
|
|
|
 |
 |
|  |
All times are GMT. The time now is 00:17.
Forum Rules:
You may not post new threads
You may not post replies
You may not edit your posts
|
HTML code is ON
vB code is ON
[IMG] code is ON
|
|
|
|
|
|
Contact Us - return to tranceaddict
Powered by: Trance Music & vBulletin Forums
Copyright ©2000-2026, Jelsoft Enterprises Ltd.
Privacy Statement / DMCA
|