Become a part of the TranceAddict community!Frequently Asked Questions - Please read this if you haven'tSearch the forums
TranceAddict Forums > Local Scene Info / Discussion / EDM Event Listings > Europe > Europe - Holland > je wilt gaan draaien: wat hebbie allemaal nodig??
Pages (4): « 1 2 3 [4]   Last Thread   Next Thread
Share
Author
Thread    Post A Reply
Mysteric
Supreme tranceaddict



Registered: Sep 2000
Location: Veluwe -> Holland

Hey...
ik ben vorig jaar ook met draaien begonnen. Had geen budget voor Technics en heb me dus heel goed in de alternatieven verdiept.
Ben uiteindelijk voor 2 Omnitronic DD-3250's gegaan. Behringer DX-500 mixertje had ik al.

Over die draaitafels:
De torque is erg hoog (hoger dan Technics), d.w.z. dattie heel krachtig is. De platter zal bij het een backspin niet mee terug draaien dan.
Chassis is niet erg stevig. Moet 'm niet vlakbij een box zetten, dan swingt de tt met de beat mee. Maarja...op grote feesten (TE, IC enz) hebben ze hier ook nogal last van (zelfs met Technics) daar plakken ze gewoon extra gewicht op de naald. Zodat 'ie met geen mogelijkgheid uit die groef te krijgen is.
Ik heb er stanton500 mk2 naalden onder, een van de goedkoopste. Maar wel een van de beste. Je kan ook voor ortofoon-naalden of banana-dingen gaan, ziet er gaaf uit maar op je kamer hoor je het verschil toch niet.

En als je er eenmaal één of twee hebt moet je ze heel goed instellen, neem daar echt de tijd voor en begin niet gelijk te draaien. Verkeerde instellingen (naald, armhoogte, gewicht e.d.) is funest voor je naald en je vinyl.

Over verschilllende technische dingen kun je het beste op www.new-line.nl kijken. Daar staat alles in het NL uitgelegd (technische gedeelte op de site)

Tja, draaien zelf kan je leren op de heuze dj-school(idp). Maar het is natuurlijk leuker het zelf te ontdekken. Tja, in het begin ben je veel aan het tellen enzo maar dat gaat vanzelf minder worden (hoop ik voor je). En die pitch bijstellen gaat ook steeds makkelijker. Het is alleen fucking veel oefenen voordat het ergens op lijkt...

En dan over platen kopen...das kut want die zijn na de invoering van de euro flink duurder geworden. Maar een goede online-shop is natuurlijk: www.only-djs.com en twee wat mindere www.recess.nl en www.dancegrooves.com. Alle drie in NL trouwens.

Andere sites die je zeker moet checken als je meer info over draaien wil:
www.djforum.nl
http://www.crosswinds.net/~djturntable/index.htm
http://www.kenj.nl/images/cursus.htm


___________________
"Trance is proof that God loves us and wants us to be happy."

Old Post Feb-12-2002 18:52  Netherlands
Click Here to See the Profile for Mysteric Click here to Send Mysteric a Private Message Add Mysteric to your buddy list Report this Post Reply w/Quote Edit/Delete Message
blup
Supreme tranceaddict



Registered: Jul 2001
Location: Utrecht, Netherlands
Red face

Mja,
2 directdrive want belt draait zich altijd eruit.
al zou je tiesto op 2 belts laten draaie bakt hij er niks van.
ik zou dus kiezen voor 2x vestax:

quote:
PDX 2000 is a totally new turntable designed strictly for professional DJ's. Its high torque, quick response DC motor and heavy duty A.S.T.S. tone arm provides the best performance. · Power switch is located on the top surface. It allows DJ's to make a special "motor off" effect in quick action · The heavy duty A.S.T.S. tone arm is also newly designed for this model. Its stability and elaborateness enables non-skipping performance in any occasion. · 100mm +/- 10% fine pitch control fader is provided for fast and accurate beat matching. · +/- 50% ultra pitch control fader allows DJ's to be more creative. · Start & brake speed control volumes are provided for new mixing techniques. · Reverse button makes the platter spin backwards in one quick action. · Newly designed high condensed moulded body provides the best acoustic sound as well as high endurance against feedback. Futuristic curved body with staring silver finish makes the PDX 2000 the turntable of the space age. · Newly designed DC motor creates 2.0 Kg/cm of rotation torque and super fast start and brake (within 1/6 rpm).

Prijs: € 685,66 € 815,93 incl. 19% BTW
ik heb hem dus in een winkel gezien hij is mooi, mega sterke/snelle moter... etc etc.

naald/element:

Prijs: € 65,79 € 78,29 incl. 19% BTW


mixer gemini:

quote:
4 stereo channels · 1 phono/line convertible, 2 phono, 5 line and 3 mic inputs · BPM displays and beat offset indicators · Cut feature for low, mid and high for each channel · Low, mid, high and gain controls for each channelAssignable and removable crossfader · Balanced and unbalanced master outputs · Peak hold LED meters DJ booth output level control

Prijs: € 453,32 € 539,45 incl. 19% BTW

Eindversterker 2x450:

quote:
DYNACORD's STANDARD PRECISION SERIES amplifiers are made to meet the highest requirements of any on-the-road application. Thus they provide on-board protection against thermal and capacitive overload, short-circuit and the occurrence of HF or DC at the output. Additionally, special circuitry prevents the output-stage transistors from being damaged by Back-EMF. During soft start, delayed switching of the power outputs is accomplished via relays and a limiter controls the initial current inrush, preventing the mains fuse from being blown during the power-on operation. · The mechanical construction as well is carried out following the highest precision standards of the industry. The robust steel chassis provides extreme rigidity and it is meant to live through any hard wearing condition of a touring application. Thermal stability is guaranteed by two 3-Mode (OFF/SLOW/FAST) silently running fans that offer the possibility to also use the amplifiers in a studio environment. · The extensive comparator circuitry constantly monitors the input and output signals and activates the internal limiters whenever a non-linear operational state is encountered. This provides reliable protection of the connected loudspeaker systems against overload and clipping. The sound quality of the STAND_ARD PRECISON SERIES power amplifiers is superb. Using comprehensive dimensioned power supply units with low-interference toroidal transformers gains a headroom that exceeds the nominal power handling capacity by far. No V/l-Foldback-Limiter circuits are employed within the power amplifiers, making it possible to operate the amps on complex loads up to i~O0 phase angles without a problem. · The input facilities are carried out as balanced XLRF-type sockets while the Direct-Outs - on which the carried-through signals are present - come as XLRM-type connectors. Using the Input Routing-switches lets you determine if the STANDARD PRECISION SERIES amplifiers are operated in DUAL (stereo) or PARALLEL (monaural) mode; "mono-bridged" operation is also possible


Prijs: € 619,52 € 737,22 incl. 19% BTW



Verlichting: Scan:

quote:
DMX intelligent scanner • Built-in 5mW laser • 15 colors plus white • 14 gobos • Seperate color and gobo wheel • Sound active with built-in programs • Digital display • Lamp: 12v/100w JCR 1500 hour lamp life • Dimensions: 11.5" x 6" x 4.5" • Weight: 10 Lbs

Prijs: € 352,13 € 419,03 incl. 19% BTW

beams etc:

quote:
Thousandfold proved beam effect in professional quality · Two beams sort from any of the lenses performing a circular movement and change the direction of movement at any bass beat · When using smoke, the brilliant colours are especially fortified · The large illumination angle of the effect allows the use even in larger rooms · Sound-controlled via built-in microphone · The response behaviour of the light effect can be regulated by a rotary regulator · Ideal for party rooms, small discos etc. · Very easy exchange of lamps · Delivery in an especially sales promoting four-colour box · Ready for being connected with power plug · For two 120 V/300 W lamps


Prijs: € 63,07 € 75,05 incl. 19% BTW

laser..:

quote:
Fascinating laser games · 5 mW-laser with the classification 3 A · More than 100 patterns (manual control) · 16 preset built-in patterns (Auto/Music) · Manual control or sound-control · Red laser, < 5mW · Low noise · Power unit included · Comes in a sales-promoting 4-colour-carton

Prijs: € 63,52 € 75,58 incl. 19% BTW
Dit is er niet zo een als op grote feesten dus, deze maakt vormpjes op de grond.

Rook:

quote:
Compact smoke-machine · Quality thermostate · Powerful output · Overheat protective switch · Including On/Off remote control · With T_V/GS-label

Prijs: € 167,44 € 199,25 incl. 19% BTW
neem geen mist machines, deze maken de grond glad, alles gaat ervan plakken het word een vieze bende



etc etc etc.. je ziet dat je er wel geld voor moet hebben,
en je hebt dus ook nog geen ophang dingen voor de lampen etc..
maar je ziet dat het een duur grapje is.


___________________

Old Post Mar-03-2002 13:08 
Click Here to See the Profile for blup Click here to Send blup a Private Message Visit blup's homepage! Add blup to your buddy list Report this Post Reply w/Quote Edit/Delete Message
blup
Supreme tranceaddict



Registered: Jul 2001
Location: Utrecht, Netherlands

(verdomme ik was eerst nog een senior addict)


___________________

Old Post Mar-03-2002 13:09 
Click Here to See the Profile for blup Click here to Send blup a Private Message Visit blup's homepage! Add blup to your buddy list Report this Post Reply w/Quote Edit/Delete Message

TranceAddict Forums > Local Scene Info / Discussion / EDM Event Listings > Europe > Europe - Holland > je wilt gaan draaien: wat hebbie allemaal nodig??
Post New Thread    Post A Reply

Pages (4): « 1 2 3 [4]  
Last Thread   Next Thread
Click here to listen to the sample!Pause playbackUnkown Track Plz Help!!! [2005] [0]

Click here to listen to the sample!Pause playbackGabry Fasano - "Jaiss Banging" (Bang Mix) [2002]

Show Printable Version | Subscribe to this Thread
Forum Jump:

All times are GMT. The time now is 16:34.

Forum Rules:
You may not post new threads
You may not post replies
You may not edit your posts
HTML code is ON
vB code is ON
[IMG] code is ON
 
Search this Thread:

 
Contact Us - return to tranceaddict

Powered by: Trance Music & vBulletin Forums
Copyright ©2000-2026, Jelsoft Enterprises Ltd.
Privacy Statement / DMCA
Support TA!