Become a part of the TranceAddict community!Frequently Asked Questions - Please read this if you haven'tSearch the forums
TranceAddict Forums > Main Forums > Chill Out Room > CRTL + V thread part duex
Pages (13): « 1 2 3 4 [5] 6 7 8 9 10 11 12 13 »   Last Thread   Next Thread
Share
Author
Thread    Post A Reply
Dr. Cfire
Supreme tranceaddict



Registered: Apr 2003
Location: Calgary

12 Units - (bits 7:0) Raw A/D value: 00 (default). The lowest nibble defines the range and/or type of analog value
associated with the I/O point. The devices use this nibble to correctly interpret the I/O point data.
Unit [3:0] Description LCD
0 Raw A/D Value 0-100%
1 4-20 mA 4.00 mA - 20.00 mA
2 0-20 mA 0.00 mA - 20.00 mA
3 Discrete ON / OFF
4 0-10V - 00.00V 0.00V - 10.00 V
5 Not used -
6 °C 0000.0C
7 °F 0000.0F
8 Temp C to mA
9 Temp F to mA

13 Power Supply # - (bits 7:0)
External supply: 0 (default). Value range 0 through 4. Turns on a local power supply to supply power to an external device. A parameter value of 0 indicates no power supply. A parameter value of 1, 2, 3, or 4 enables that particular internal supply connection.

Value Source
0 External Power Source
1 Supply Control #1
2 Supply Control #2
3 Supply Control #3
4 Supply Control #4
Three parameters define a power supply connection: power supply selection, voltage, and warmup time. The voltage parameter defines the supply voltage. The warm-up parameter defines the time the power supply is on before evaluating the input point.

14 Report Type - (bits 7:0) Analog report type: 1 (default). Discrete/bit report type: 0. Defines the internal data structure and
reporting definition for an I/O point. If a discrete point changes state, all I/O points are reported to the Gateway in discrete values. An analog input can be treated as a digital value using the Threshold and Hysteresis parameters.

15 Delta - (bits 15:0) Disable: 0 (default). Value range 1 to 65535. Defines the change required between two successive sample points to trigger a report condition.

16 Invert Flag - (bit 0) Inactive: 0 (default). Compliments the polarity of the sensed I/O point. A value of 1 becomes 0. An analog value is not changed, but an analog value with a threshold and hysteresis set is complimented.

17 Default Value - (bits 15:0)
0 (default). Value range 0 to 65535. Defines the safe state for each output. This parameter only applies to outputs. A value of 65535, or 0xFFFF, sets the default value to the last known state.

Old Post Jun-29-2007 20:53  Canada
Click Here to See the Profile for Dr. Cfire Click here to Send Dr. Cfire a Private Message Add Dr. Cfire to your buddy list Report this Post Reply w/Quote Edit/Delete Message
iclone
no footage found



Registered: Feb 2006
Location: berlin4lyf

DATA DATES; SET DATES;
DDATE=INPUT(MDATE,MONYY5.);

DATA ABK;
INFILE CNABK;
INPUT @1 MDATE $7.
@11 SKD_DPT $3.
@17 NDPTRS 5.;
RENAME SKD_DPT=ENTITY NDPTRS=NOPS;
NDPTRS=ROUND(NDPTRS,1);
DDATE=INPUT(MDATE,MONYY7.);
MONTH=MONTH(DDATE);
YEAR=YEAR(DDATE);
IF SKD_DPT NOT IN ('SYS','SPO');
DROP MDATE;
IF NDPTRS LE 1 THEN DELETE;

Old Post Jun-29-2007 20:55 
Click Here to See the Profile for iclone Click here to Send iclone a Private Message Add iclone to your buddy list Report this Post Reply w/Quote Edit/Delete Message
Masonious
Junior tranceaddict



Registered: Feb 2005
Location: Seattle

all the blood rushing to your head, veins popping out shitting your pants

Old Post Jun-29-2007 22:28  United States
Click Here to See the Profile for Masonious Click here to Send Masonious a Private Message Add Masonious to your buddy list Report this Post Reply w/Quote Edit/Delete Message
Ygrene
Dr. Stinkburger Deluxe



Registered: Nov 2003
Location: Totergefuttert

quote:
Originally posted by Masonious
all the blood rushing to your head, veins popping out shitting your pants


Stiff legged deadlifts???

Paste:

July 12
Breakfast 8:30 to 9 (change start and times)
KA training 9 to 11
Lunch 11-12
Jenn-Air training 12-1:30 (change)
Tear down 2-4


___________________

Old Post Jun-29-2007 23:28  United States
Click Here to See the Profile for Ygrene Click here to Send Ygrene a Private Message Add Ygrene to your buddy list Report this Post Reply w/Quote Edit/Delete Message
Sunsnail
Global Moderator



Registered: Sep 2004
Location:

# A Christian substitute to the otherwise sacrilegious "good luck", which implies that anything can be random and out of the hands of God. Used to express concern and prayer for someone.

Old Post Jun-29-2007 23:31 
Click Here to See the Profile for Sunsnail Click here to Send Sunsnail a Private Message Add Sunsnail to your buddy list Report this Post Reply w/Quote Edit/Delete Message
Ian
Not dead yet.



Registered: Dec 2001
Location: UK

20:54:33) (@Psy-T) In a suprising turn of events, Native Instruments has announced that the highly regarded Absynth virtual instrument will soon be released as open source, freely distributable under the GNU General Public License.
(20:54:33) (@Psy-T) The announcement has raised eyebrows in the software community, given NI's reputation for powerful but bracingly priced products. Open source proponents are hailing NI's decision as a landmark event, but "will believe it when they see it."
(20:54:33) (@Psy-T) A backlash is expected from existing Absynth owners, many of whom sold children to afford the software, though more hopeful users are looking forward to the accelerated development and swift bug fixes associated with open source projects.
(20:54:34) (@Psy-T) At a press conference called to calm nervous shareholders, acting NI chief Mr Rolf Neumann explained his decision. "Man, would you all just relax?" said Neumann. "It's just possessions. What can money give me that I can't get from a tree or a river or something?"
(20:54:38) (@Psy-T) Neumann's comments were greeted with a rather grim silence.
(20:54:40) (@Psy-T) "Hey, I bought a cow!" added Neumann, pointing out the window.
(20:54:43) (@Psy-T) The breed of the cow is not yet known, but the distinctive patterning of white belt on black would suggest Dutch Belted. Details will be announced closer to the release date.

Old Post Jun-29-2007 23:33 
Click Here to See the Profile for Ian Click here to Send Ian a Private Message Add Ian to your buddy list Report this Post Reply w/Quote Edit/Delete Message
Masonious
Junior tranceaddict



Registered: Feb 2005
Location: Seattle

quote:
Originally posted by Ygrene
Stiff legged deadlifts???
Tear down 2-4


description of first date trying to think of something interesting to say

Old Post Jun-30-2007 01:45  United States
Click Here to See the Profile for Masonious Click here to Send Masonious a Private Message Add Masonious to your buddy list Report this Post Reply w/Quote Edit/Delete Message
Omega_M
Nostalgia



Registered: Jun 2005
Location: Ether

quote:
Originally posted by Dr. Cfire
12 Units - (bits 7:0) Raw A/D value: 00 (default). The lowest nibble defines the range and/or type of analog value
associated with the I/O point. The devices use this nibble to correctly interpret the I/O point data.
Unit [3:0] Description LCD
0 Raw A/D Value 0-100%
1 4-20 mA 4.00 mA - 20.00 mA
2 0-20 mA 0.00 mA - 20.00 mA
3 Discrete ON / OFF
4 0-10V - 00.00V 0.00V - 10.00 V
5 Not used -
6 °C 0000.0C
7 °F 0000.0F
8 Temp C to mA
9 Temp F to mA

13 Power Supply # - (bits 7:0)
External supply: 0 (default). Value range 0 through 4. Turns on a local power supply to supply power to an external device. A parameter value of 0 indicates no power supply. A parameter value of 1, 2, 3, or 4 enables that particular internal supply connection.

Value Source
0 External Power Source
1 Supply Control #1
2 Supply Control #2
3 Supply Control #3
4 Supply Control #4
Three parameters define a power supply connection: power supply selection, voltage, and warmup time. The voltage parameter defines the supply voltage. The warm-up parameter defines the time the power supply is on before evaluating the input point.

14 Report Type - (bits 7:0) Analog report type: 1 (default). Discrete/bit report type: 0. Defines the internal data structure and
reporting definition for an I/O point. If a discrete point changes state, all I/O points are reported to the Gateway in discrete values. An analog input can be treated as a digital value using the Threshold and Hysteresis parameters.

15 Delta - (bits 15:0) Disable: 0 (default). Value range 1 to 65535. Defines the change required between two successive sample points to trigger a report condition.

16 Invert Flag - (bit 0) Inactive: 0 (default). Compliments the polarity of the sensed I/O point. A value of 1 becomes 0. An analog value is not changed, but an analog value with a threshold and hysteresis set is complimented.

17 Default Value - (bits 15:0)
0 (default). Value range 0 to 65535. Defines the safe state for each output. This parameter only applies to outputs. A value of 65535, or 0xFFFF, sets the default value to the last known state.


Is that for a microprocessor or a PLC ?


___________________

Download and review ! Omega_M - In the Mix (Beta Version)

Originally posted by twilightki : It feels like something you'd listen to at 4 in the morning, or listen to in your car while you're going in a tunnel.

Old Post Jun-30-2007 01:49  India
Click Here to See the Profile for Omega_M Click here to Send Omega_M a Private Message Add Omega_M to your buddy list Report this Post Reply w/Quote Edit/Delete Message
Sunsnail
Global Moderator



Registered: Sep 2004
Location:

http://www.sunsnailtech.com/picture...0high%20res.jpg

Old Post Jun-30-2007 01:53 
Click Here to See the Profile for Sunsnail Click here to Send Sunsnail a Private Message Add Sunsnail to your buddy list Report this Post Reply w/Quote Edit/Delete Message
babyvsrhino
Senior tranceaddict



Registered: Jun 2006
Location: Pittsburgh, PA

A8R32-MVP Deluxe


___________________

Old Post Jun-30-2007 02:08  United States
Click Here to See the Profile for babyvsrhino Click here to Send babyvsrhino a Private Message Visit babyvsrhino's homepage! Add babyvsrhino to your buddy list Report this Post Reply w/Quote Edit/Delete Message
DJ Chrono
HTML is not allowed.



Registered: Jan 2002
Location: toronto

BRINKSTER

Old Post Jun-30-2007 02:14  Canada
Click Here to See the Profile for DJ Chrono Click here to Send DJ Chrono a Private Message Add DJ Chrono to your buddy list Report this Post Reply w/Quote Edit/Delete Message
tubularbills
Max Power!



Registered: Apr 2003
Location: Middle of fucking nowhere

quote:
Originally posted by gehzumteufel
electrics irritate my skin a lot. way more than the razor so i choose not to use one.

will: its quite painful on the face and will take like 4-5 treatments to get it all off. im going to do it though. i HATE shaving. and im going to have the unibrow part done too.


any idea how much it costs? i don't think i want it on my entire face - maybe just from the chinline down (as that's the thickest and roughest part).

Old Post Jun-30-2007 07:36  United States
Click Here to See the Profile for tubularbills Click here to Send tubularbills a Private Message Add tubularbills to your buddy list Report this Post Reply w/Quote Edit/Delete Message

TranceAddict Forums > Main Forums > Chill Out Room > CRTL + V thread part duex
Post New Thread    Post A Reply

Pages (13): « 1 2 3 4 [5] 6 7 8 9 10 11 12 13 »  
Last Thread   Next Thread
Click here to listen to the sample!Pause playbackPease ID track 2 from AvB - ASOT 200 [2005] [1]

Click here to listen to the sample!Pause playbackDisco Citizens - Footprint [2002]

Show Printable Version | Subscribe to this Thread
Forum Jump:

All times are GMT. The time now is 01:44.

Forum Rules:
You may not post new threads
You may not post replies
You may not edit your posts
HTML code is ON
vB code is ON
[IMG] code is ON
 
Search this Thread:

 
Contact Us - return to tranceaddict

Powered by: Trance Music & vBulletin Forums
Copyright ©2000-2025, Jelsoft Enterprises Ltd.
Privacy Statement / DMCA
Support TA!