Bah, outdoor, I think you'll need 1000Watts. But, it does depend on the surface. You don't need special speakers for paricular environnements. Just use normal speakers with a good frequency response, I'm sure dj_tranz will give you a good product

___________________

quote:

Originally posted by Push2005 Ik ben net terug begonnen met cassettes op te kopen... Die pitchcontrol is echt ongelofelijk !

quote:

Originally posted by Tiger777 I'm sure dj_tranz will give you a good product

___________________

It has to start somewhere,
It has to start sometime,
What better place then here?
What better time than now?
--Rage Against the Machine

quote:

Originally posted by Tiger777 I'm sure dj_tranz will give you a good product

haha

But yeah, just make sure ya got some good wattage packed in em ya should be set

___________________
Peace DigDug

Hehehehe, well I guess I should say something, hahahaha LMAO!!!

ok, kidding aside get a pair of these



The MVP37 is a two-way, full-range loudspeaker system. Outfitted with dual cast frame 15-inch drivers the enclosure’s substantial low-end performance allows the unit to easily provide full-bandwidth sound reinforcement without the use of subwoofers, while its overall height is such that it can effortlessly project over the tops of crowds. Central to the MVP37 is a bass-ported design and a one-piece 90x40 lrge format molded horn section housing Community’s new proprietary LM20™ compression driver. Just like all he other MVP Series, the MVP37 offers a Thermal-Link™ Driver Protection System automatically monitoring high frequency performance. The Thermal-Link circuit is designed to automatically adjust to the constantly changing protective threshold unique to a given application based upon driver temperature. Solid-state and self-resetting, this safeguarding network guarantees that each enclosure can remain running at maximum output, without risk of speaker damage. Externally corner protectors, recessed steel handles, rigging points, rubber feet, a 16-guage steel grille, ¼” and locking connectors are all found on each MVP37 enclosure.

FEATURES:
SIGNAL PRESENT LED
THERMAL LINK™ HF DRIVER PROTECTION
LM20™ LOW MASS FERROFLUID-COOLED NON-METALLIC DIAPHRAGM
HEAVILY BRACED MDF CONSTRUCTION
TWO ¼" INPUT CONNECTORS, AND TWO LOCKING CONNECTORS
RECESSED HANDLES
16 GAUGE STEEL GRILLES

Specifications:
Loudspeaker Type: Two-way, Full-range
Operating Range: 60 Hz - 16 kHz
50 Hz - 14 kHz (+/-6dB)
Max Input Ratings: 400W continuous, 1000W Program 40 volts RMS, 89 volts momentary peak
Recommended Power Amplifier: 800W to 1200W @ 4 Ohms
Sensitivity 1W/1m:
98 dB SPL (63 Hz - 12500 Hz 1/3 octave bands) 98 dB SPL (250 Hz - 4 kHz speech range)
Maximum Output: 124 dB SPL / 131 dB SPL (peak)
Nominal Impedance: 4 Ohms
Min Impedance: 3.3 Ohms @ 40 Hz
Nominal -6dB Beamwidth:
90° H (+-12° / --44°, 2 kHz - 12.5 kHz)
40° V (+16° / --19°, 2 kHz - 12.5 kHz)
Axial Q / DI: 12.9 / 11.1, 2 kHz - 12.5 kHz
Crossover Frequency: 2 kHz
Recommended Signal Processing: None
Drivers: LF (2) 15"
HF (1) LM20™ Compression driver,
Non-metallic, Ferrofluid-cooled
Driver Protection: Thermal Link™
Input Connection:
(2) Locking Connectors (NL4MP compatible)
(2) 1/4 in. jacks
Controls: None
Enclosure: MDF
Enclosure Hardware:
(2) Handles
(8) Corner protectors
Mounting / Rigging Provisions6) 5/16-18 hanging point inserts
Grille: 16 gauge perforated steel
Required Accessories: 60Hz High pass filter
Supplied Accessories: None
Optional Accessories: STRAPKIT: (3) steel straps for suspending
Dimensions: Height: 43 in. / 1092 mm
Width (front): 18 in. / 457 mm
Width (rear): 12 in. / 305 mm
Depth: 19 in. / 483 mm
Weight: 86 lb. / 42.5 kg

and get something like Crown CE4000 or Crest Audio LT2000 or Carver Pro PX1450 amplifier, now what about monitors, gotta have those!!! or do you have your own pair? Cheers...

___________________
Daniel, aka DJ Tranz(MafiyaBeatts-LA,SF)
Rest In Peace Adam 'STARKID' Spears,Thank You For Your Wonderful Music That Will Live On Forever, RIP Buddy...

www.mafiyabeatts.com Vote for Tranz @ The DJ List!

i recommend the community speakers as well
our company uses them for our concert sound and they are mint
IMO they're the best loudspeakers you can get aside from turbosound

___________________
Tony Morello Dot Com
Soundcloud
Facebook
Twitter
The Drunken Monkey Podcast
The Mixdown Podcast presented by Tony Morello

Thanks for the help guys. I really appreciate it.

We have 2 stage monitors, both rated at 100W program. Would the amp used for 1000W speakers blow them out?

defintely! you will need a seperate amp for your monitors, putting out about 200W channel max i think.

___________________

Visit my site Antiwar Homepage

quote:

Originally posted by JohnSmith defintely! you will need a seperate amp for your monitors, putting out about 200W channel max i think.

Thnaks John, that's correct. You wanna have a separate monitors amp whenever possible. Get like a Crown XLS402 amp for the monitors, just because it says 100watt prog, don't mean it can't handle more than that. A speaker will handle more power as long as it comes from a clean amp, like Crown, shitty and cheap amps even at lower than 100w will ruin the speaker.

___________________
Daniel, aka DJ Tranz(MafiyaBeatts-LA,SF)
Rest In Peace Adam 'STARKID' Spears,Thank You For Your Wonderful Music That Will Live On Forever, RIP Buddy...

www.mafiyabeatts.com Vote for Tranz @ The DJ List!