Hi guys,
Im aware of V-Synths on the market which are capable of emulating the Supersaw Wave form of the Jp8000 and Jp8080. However I saw a Fantom-S reasonably cheap and was wondering if anyone has had the experience of achieving some close to the SuperSaw sound on the Fantom-S or X series.

Thanks Guys.

You might find these threads helpful:

http://forum.fantomized.info/index....58&fid=0&page=1

http://www.tranceaddict.com/forums/...ighlight=fantom

A Supersaw waveform(s) is available for the Fantom S/X. However, I am unsure whether the waveform is standard or only available via the SRX Dance expansion board.

Also, you can create your own Supersaw waveforms via the Fantom's sampler. I did it with my Motif ES, and it was quite simple. There are several ways to do this, but here is an overview of the steps I took:

1) Load a raw Saw waveform to 7 sequencer tracks (I used a Saw waveform from an Ilio sample CD).
2) Fine detune 6 of the 7 Saw waveforms.
3) Resample the results of the 7 Saw waveforms playing at once.
4) Edit the resampled waveform (normalize, set loop points, etc.).
5) Save the sample as a user waveform for the basis of creating Supersaw type patches.

Ted

___________________
http://www.acidplanet.com/artist.asp?AID=209111&T=7853

Last edited by TXHARP on Mar-07-2005 at 23:49