quote:

Originally posted by Dirk W. I don't know anything about computers except how to use this (TA), use myspace, aol and download porn. now, i got all professional and bought 2 gb of ram for my computer in the form of 2x1gb DDR things looking back, i think my computer said it only takes 1gb maximum. i tried to read up on this and they say there are ways around that. is that true? can someone tell me how? thanks.

If your computer has two memory slots try sticking them in there.

___________________
I've never been able to eat a whole baby.
Kill the women. Eat the children.
It's just one of those days where you want to bend over everyone you know and kiss their ass goodbye with a big sideways boot.

Latest Mix

SWEEET!!!! ill try that! asshole.

___________________
Helping girls make bad decisions since 1979

If you have two slots that are both DDR, then there shouldn't be a problem.

How fast is your processor?

___________________
Don't bother just to be better than your contemporaries or predecessors. Try to be better than yourself. -William Faulkner

"Life is simple. You make choices and never look back."

Hey Dirk...I know some people that can help you. What you should do is write your question down on a piece of paper, tape it to your head, then put a bullet through it.

I lied, I don't know anyone that can help you.

___________________

quote:

Originally posted by Dirk W. People in Dallas aren't *ssholes. Just look at me, I live in Dallas.

Meat is Murder...tasty, tasty murder.

quote:

Originally posted by Zild If your computer has two memory slots try sticking them in there.

Ok Either that or maybe your computer needs a BIOS flash because the motherboard only supported 1GB at release but subsequent BIOS updates may have increased the amount of RAM your motherboard can handle. Did that make sense?

___________________
I've never been able to eat a whole baby.
Kill the women. Eat the children.
It's just one of those days where you want to bend over everyone you know and kiss their ass goodbye with a big sideways boot.

Latest Mix

quote:

Originally posted by Zild Ok Either that or maybe your computer needs a BIOS flash because the motherboard only supported 1GB at release but subsequent BIOS updates may have increased the amount of RAM your motherboard can handle. Did that make sense?

yea, that is a lot more helpful. and i get these bios flash's from the manufacturer? its just a small software utility right?

___________________
Helping girls make bad decisions since 1979

quote:

Originally posted by Dirk W. yea, that is a lot more helpful. and i get these bios flash's from the manufacturer? its just a small software utility right?

Yeah the motherboard has a small BIOS chip on it that stores all the information in needs, so you just download the new BIOS from the mobo manufacturer's website and follow the attatched instructions. That may or may not do the trick but you should flash your BIOS anyway to stay up to date.

What kind of motherboard do you have?

___________________
I've never been able to eat a whole baby.
Kill the women. Eat the children.
It's just one of those days where you want to bend over everyone you know and kiss their ass goodbye with a big sideways boot.

Latest Mix

But what I meant by the first post is if you have 2 slots go ahead and stick them in there and see if you can boot. If you can see if it recognizes the memory. You can use programs like CPU-Z or Sandra to get the specs on your machine for verification.

___________________
I've never been able to eat a whole baby.
Kill the women. Eat the children.
It's just one of those days where you want to bend over everyone you know and kiss their ass goodbye with a big sideways boot.

Latest Mix

Jesus how old is your computer? I haven't seen a motherboard that didn't support at least 2GB of RAM for sale for over 4 years now. Like, since before the nForce 2 chipset.

First thing to do is to put the memory in and see if it works. If the computer boots, check to see if the computer is recognizing the full 2GB. If it does, then you could be golden. However, if the system starts randomly locking up or crashing, or programs crashing/failing to run, there's a problem. Sometimes it's as simple as updating BIOS or increasing RAM voltage, or it could be the fact that you're trying to pair brand new technology with semi-incompatible years-old technology.

Regardless of if it works, upgrade your BIOS (latest BIOS should be available from your motherboard manufacturer's website, along with instructions).

The RAM size limitation could be chipset and/or socket dependant, and it's quite possible that the board doesn't support DDR memory. In that case you'll have to get a new motherboard in order to get it to work. That could also require a new CPU upgrade (or, I should say, it WILL require a new CPU upgrade unless your current motherboard is (AMD) Socket 939 or (Intel) Socket 748. It's almost impossible to find motherboards with the older sockets (for older CPU's like Athlon XP or Pentium 4)).

And in turn, that might require a new video card, depending on what you have right now and on what your new motherboard supports. Video cards are either AGP (older tech) or PCI-E (new/current tech) and they are not backwards-compatible nor will one even fit into the slot for the other.

More information about what you currently have would help. Run CPU-Z and SiSoft Sandra to get the specs on your hardware. If you know your motherboard socket, chipset, and manufacturer that would be especially helpful.

yea, i have a piece of shit running on pure hate.

its a 2.2 ghz.... i don't know anything about it. lemme see what i can find out

___________________
Helping girls make bad decisions since 1979

heres what it is....

CPU: Intel® Celeron® Processor 2.20GHz (w/128KB L2 cache & 400MHz FSB)
Operating System: Microsoft® Windows® XP Home Edition
Chipset: Intel 845GL chipset
Memory: 128MB DDR (PC2100)

___________________
Helping girls make bad decisions since 1979