ive got a fluorescent light fixture that i put together today...
only problem is that i was hoping i could plug it into a typical socket.
the instructions say to wire it through my wall or something along those lines that i dont want to go through the trouble of doing nor dont think i will.
what ive got are (from the ballast...):
1 black wire
1 white wire
1 green bolt for grounding
is there any way to do this and if not... how is one supposed to install it?!
___________________
www.illysounds.com
Mar-31-2006 00:42
eye_03
lolz!!!11
Registered: Apr 2002
Location: Vancouver
well, the black wire goes from your power source to the light, and the white wire goes back from the light to your power source. also, connect a wire from the green bolt to a metal part of your light.
hope that helps, it will be my future career (electrician)
___________________
Mar-31-2006 00:50
colonelcrisp
Isn't Batshit Crazy
Registered: Apr 2003
Location: Ottawa
you need to get a cheap three wire grounded extension cord form the hardware store
cut the female end off (the one with the holes)
and then the green wire goes to teh green bolt
white to white
black to black etc
as long as the grounds are connected then you could connect black to white, white to black if you wanted as tehy are reversible
jsut dont connect a hot to a ground
its easy as that
get some marretts for the electrical connections, screw them down on the wires,m then wrap in electrical tape for safety reasons
___________________
quote:
Originally posted by pkcRAISTLIN
I have 3 hobbies: gaming, DJing & correcting maladjusted fools on the internet.
quote:
Originally posted by pkcRAISTLIN
Yeah, I’d like to know what horrible, scarring incident in your childhood turned you into such an ignorant, intellectual-hating philistine?
Mar-31-2006 00:51
wizniz
operator
Registered: Feb 2005
Location: terror wagon
quote:
Originally posted by colonelcrisp
you need to get a cheap three wire grounded extension cord form the hardware store
cut the female end off (the one with the holes)
and then the green wire goes to teh green bolt
white to white
black to black etc
as long as the grounds are connected then you could connect black to white, white to black if you wanted as tehy are reversible
jsut dont connect a hot to a ground
its easy as that
get some marretts for the electrical connections, screw them down on the wires,m then wrap in electrical tape for safety reasons
wow. exactly what i was looking for.
thank you colonel.
i leave this up in the extremely rare instance that someone else was curious...
___________________
www.illysounds.com
Mar-31-2006 00:55
Zenchowdah
I'm beyond it.
Registered: Jul 2003
Location: va
quote:
Originally posted by eye_03
well, the black wire goes from your power source to the light, and the white wire goes back from the light to your power source. also, connect a wire from the green bolt to a metal part of your light.
hope that helps, it will be my future career (electrician)
cool! im going to school for it right now. year and 4 months left
___________________
Get Killed. Get Noticed.
Keine Schoenheit Ohne Gefahr
Mar-31-2006 02:03
Ang ' ela_ie
Gee whiz!
Registered: Jul 2004
Location: SF
Im a handyman.
___________________
Mar-31-2006 02:03
superglo
shake well before use ...
Registered: Jun 2003
Location: in between the sheets
And to think i was just about to send my exhaust fan for re-wiring.
i'm just gonna do it myself.