Did you plug your mixers into the RIGHT ports? You're supposed to plug the RCA cables into LINE and NOT PHONO. It's a common mistake if you did that.

quote:

Originally posted by jupiterone Did you plug your mixers into the RIGHT ports? You're supposed to plug the RCA cables into LINE and NOT PHONO. It's a common mistake if you did that.

Plus: have you set the switches at the top to CD input? If they're on 'phono', you won't get any sound either.

___________________

d&b session 20090519
My take on... (various mixes planned, updated when I can be arsed)

man they are! ill double check but! im definetly not that dumb with electronics....

___________________
Lets hunt some rabbit boi

Is the mixer on?

Trace the signal through - are you getting levels showing up on your mixer?

___________________
Stu Cox |

no levels

___________________
Lets hunt some rabbit boi

headphone volume? different RCA/digital cables?

if you have an ipod or any other device that plays audio, try setting it up to ur mixer.. if it doesn't work then its probably the mixer.. but are u sure u have the cables going in the right ports?

since you are a new owner I'll suggest firstly that you have read your manuals! sounds like you've checked your connections appropriately but make sure your gains arent turned down, if you've set your input switches to line and are hooked up appropriately this woudl be the only cause. gl.

btw: you can also connect a pair of phones to your cdj's to see if its a mechanical problem with them.

___________________
http://www.djandrewgarcia.com

mess with the gains. Believe it or not, when I first started hooking my shit up that was the problem. Make sure the gains/trims are up off of 0.

also check for a master limiter

that messed with me at first too

try plugging something else into the mixer... maybe a home cd player or dvd player or something, just to check.

___________________
Fortuna Favet Fortibus.

If all else fails, might be a b0rked mixer.