After much googling, I figured I might as well turn to TA for some help on this one as I'm sure I can't be the only one with this issue.

There's probably a few of us out there whose laptops see some serious mileage. In and out of Wireless Networks at home, the office, hotels, departure lounges, etc.

Say you have a location (IE at home) where you have a Static IP configured. Obviously, when you go to another location and try to access the network using that adapter, you're (often) forced to remove the Static IP settings in order to connect. However, when you return to your home location, you're forced to input all your Static IP settings once again.

I know it sounds like a minor annoyance, but for all the Windows geeks out there - Is there a method / setting to keep specific IP settings for certain networks? There's obviously a means to store network credentials, passwords, etc. on a network-by-network basis, but has anyone found one to keep the IP settings?

Any suggestions would be helpful and appreciated

ummm u could keep the static ip on either the wireless device or the "wired" device....hence when u hook up to another network, just use the other option which doesnt have it set up on?

thats the easiest solution

___________________
www.elkdee.com
Soundcloud sampler: www.soundcloud.com/elkdee

i had the same problem when going back and forth from school all the time... definitely a huge pain in the ass. it would be nice to know if it's possible to do though

Forget the settings on the machine, always leave the machine to auto-DHCP.

Set your router to assign IP based on the MAC address via static DHCP. http://www.dd-wrt.com/wiki/index.php/Static_DHCP

___________________
- rabbit.joker [funny¿rabbit] | www.rabbitjoker.com |www.ddtt.org

Dark Dirty Tech Tribal. | Hands in air (trance) and feet on the floor (house).

quote:

Originally posted by rabbitjoker Forget the settings on the machine, always leave the machine to auto-DHCP. Set your router to assign IP based on the MAC address via static DHCP. http://www.dd-wrt.com/wiki/index.php/Static_DHCP

That looks like it might actually do the trick - It would solve the issue in the short-term if I were willing to flash the firmware to my router. It's the closest to a solution I've seen (I never thought of resolving the issue from the server side), but I'd still ideally like to make these choices from my (the client) side. Cheers for the idea though!

you can create connections for each of those, and enable/disable them as required

quote:

Originally posted by Jer That looks like it might actually do the trick - It would solve the issue in the short-term if I were willing to flash the firmware to my router. It's the closest to a solution I've seen (I never thought of resolving the issue from the server side), but I'd still ideally like to make these choices from my (the client) side. Cheers for the idea though!

most home routers have this option based on your computer name as well. you should find it under dhcp settings, "reserve ip" or something similar.

if this is the case you may not have to flash it in favor of dd-wrt - though it is superior to pretty much all other home router software.

mute's answer works better for client side ip settings - create new lan connections for each location and disable/enable them as needed.

quote:

Originally posted by mute79 you can create connections for each of those, and enable/disable them as required

pretty sure that would only work on hardwired connections, hes talking wireless

quote:

Originally posted by rabbitjoker Forget the settings on the machine, always leave the machine to auto-DHCP. Set your router to assign IP based on the MAC address via static DHCP. http://www.dd-wrt.com/wiki/index.php/Static_DHCP

what he said, static ips are so 1994.

___________________
[/IMG]http://i54.tinypic.com/ngycqo.png[/IMG]

quote:

Originally posted by malek what he said, static ips are so 1994.

uhh, no... i set static ips on pcs hooked up to my router, so i can rdp to them

quote:

Originally posted by mute79 uhh, no... i set static ips on pcs hooked up to my router, so i can rdp to them

yeah thats only when you are running servers of any kind (ftp, web, rdp,...) and have more than one computer behind your router.

99.9999% of people don't need those

___________________
[/IMG]http://i54.tinypic.com/ngycqo.png[/IMG]

u geek