Make sure it does mono, because something like 77.3 clubs are mono only.








*steps back from thread and snickers*

EDIT: And to relate to your question, couldn't you just get a small mixer? like...

http://www.sweetwater.com/store/detail/MG102c

or

http://www.sweetwater.com/store/detail/PV6

___________________

Now with extra singles!
my old stuff, not quite up to snuff - but I still dig it - UPDATED 9/23/2012

you'll probably be happier in the long run if you just get a new interface, I think everyone here will tell you RME. If you've got a damn moog and prophet 08 there's no reason not to splurge on a top interface, it'll sound amazing.

quote:

Originally posted by meriter you'll probably be happier in the long run if you just get a new interface, I think everyone here will tell you RME. If you've got a damn moog and prophet 08 there's no reason not to splurge on a top interface, it'll sound amazing.

+1

___________________
Mr Kaizen on Soundcloud

quote:

Originally posted by meriter you'll probably be happier in the long run if you just get a new interface, I think everyone here will tell you RME. If you've got a damn moog and prophet 08 there's no reason not to splurge on a top interface, it'll sound amazing.

+2

___________________

Now with extra singles!
my old stuff, not quite up to snuff - but I still dig it - UPDATED 9/23/2012

quote:

Originally posted by EddieZilker Make sure it does mono, because something like 77.3 clubs are mono only.

I think my head just exploded

Drop the Emu. I used to tech support for them and one actually caught fire while we were trouble shooting it. Highly unlikely to happen to you but they also sound like shit so with that sort of analogue synthage, I would upgrade in a heartbeat.

Don't want to piss on your card, but it was pretty average 10 years ago and things have just left it behind now in terms of quality and value.

It all depends actually on what you need in terms of I/O (how many, what type, room for future expansion), whether you need other connectivity (Midi, SPDIF, ADAT, etc ), and what type of base connection you want (PCIe, FW, USB etc).

Let me know and I'll post up suitable options

To add to DJ RANN's post, your signal chain is as good as your weakest link, so your budget comes into play here as well. Is $350 your budget?

I've played a Voyager before, which sounded great, but you could negatively color the sound with a cheap mixer/interface. I can't comment on RME myself.

You have the option of using a line mixer, which in my experience hasn't been a bad choice, so potentially you could run through that into the RME (at a much lesser cost than a new interface).

Taking into account what you already own though, it sounds like your budget is open, so you may want to consider something entirely new like RANN suggested, but to give good advice, knowing all of your requirements will help narrow down what you should actually get.

And, always keep in mind--don't send a Voyager through something low-quality, otherwise you've wasted the money on something that could be accomplished through a cheaper alternative. It's a pretty specialized piece of gear, and you don't want to degrade the signal chain in any way.

Edit: DJ Rann: meant to say EMU--somehow got RME in my head when writing. Can't comment on your line mixer response as they theoretically shouldn't change the sound but only the volume unless there are very crummy components involved. That's just my personal experience, however. I only mentioned a line mixer because synths are already at line level, but a line mixer increases the number of inputs you can use with a limited-input interface (it's a budget-oriented option I was intending on providing. For tracking, unless for effect, you would never run everything at once, but provides convenience when writing the song if you do). I myself use individual inputs per sound source directly into the interface, as I like my chain to have as few intermediaries as possible.

Last edited by Lith on Apr-22-2011 at 01:01

forgot to mention--if you use shitty plug-ins in your DAW, that won't help matters either. A perfect signal run through a shit EQ or compressor in your DAW won't return the best results.

quote:

Originally posted by Lith To add to DJ RANN's post, your signal chain is as good as your weakest link, so your budget comes into play here as well. Is $350 your budget? I've played a Voyager before, which sounded great, but you could negatively color the sound with a cheap mixer/interface. I can't comment on RME myself. You have the option of using a line mixer, which in my experience hasn't been a bad choice, so potentially you could run through that into the RME (at a much lesser cost than a new interface). Taking into account what you already own though, it sounds like your budget is open, so you may want to consider something entirely new like RANN suggested, but to give good advice, knowing all of your requirements will help narrow down what you should actually get. And, always keep in mind--don't send a Voyager through something low-quality, otherwise you've wasted the money on something that could be accomplished through a cheaper alternative. It's a pretty specialized piece of gear, and you don't want to degrade the signal chain in any way.

Dude, this post is seriously confusing.

I think you keep using the letters RME instead of EMU. If he had an RME , this thread would be a non-starter.

Also, I don't get what your logic is for using a line mixer:

the output of a moog is line level - it's not a mic level signal that need attenuation to become a line level signal.

Also, unless you're going to use some very nice mixer, like a pro summing mixer or vintage valve mixer, then I'd really want to go as direct as possible, straight from Moog to interface. Budget mixers/devices in the signal chain will not do anything other than distort or color.

Wait. So you bought a Moog and a Prophet, and you're using an EMU sound card Either you have more money than sense, or you just like doing things backward. Oh well, at least you're correcting the problem now I guess.

I'd grab an RME with that setup. Lynx are also good if you have a bit more cash. DON'T stick with EMU, MOTU, M-Audio if you have that kind of gear IMO.

___________________
New Mix: March 2010 Promo
Soundcloud|Facebook

Its not that I do things backwards, I purchased the EMU 1212 along with a midi controller, when I first started but I wasn't sure how into production I was going to get and I didnt want to drop $1000+ on an interface for nothing. When I looked into the 1212 I read that the converters on it were excellent and it was the best deal within its price range.

Anyways I dont plan on adding anymore hardware synths to my set up anytime soon, just maybe some external effects processors. I looked into the RME 400 and 800 they look like decent interfaces, I would like to go with something external this time so not PCI. Also how can I tell if the converters are good? Will I notice an instant upgrade from my 1212 right away?

quote:

Originally posted by DJ TL Anyways I dont plan on adding anymore hardware synths to my set up anytime soon, just maybe some external effects processors. I looked into the RME 400 and 800 they look like decent interfaces, I would like to go with something external this time so not PCI. Also how can I tell if the converters are good? Will I notice an instant upgrade from my 1212 right away?

The simple answer is yes, as the RME is huge leap in terms of conversion quality....

......but that's only if you have a decent set of monitors to take advantage of that superior conversion.

If you're going for an RME, go the whole hog and get the 800 - the 400 is still very good but it's quite close in terms of sonic quality to the Echo Audiofire range which cost quite a bit less, so therefore you're paying a lot of more to get only very slightly better conversion.

The 800 uses different chips and the clock is so solid it adds to the quality of conversion, and is only about $300 more than the 400, or nothing if you buy second hand 800.