I have a problem with my mixer i just bought it...i connected my computer to channel 1, and another table to another channel. however the second channel..when i connect anything to it...the LED's for the sound light up..as if sound was coming out..but there is no sound...sound is not coming out,,,does the channel not work or is there another problem?

put the cross fader in the middle, make sure the volume channels and gains are up,

___________________

Visit my site Antiwar Homepage

tried al lthat thanx..anything else?

everything is where it should be, the fader is in the middle..all gains are up as everything else..
i can preview the sound in my headphones
but its not coming out the main output on the speakers..and yes i did click off the preview button..

anyone?

also can this be fixed if its broken?

thanx

you blew your amp or your speakers?
Maybe you've got a broken fuse... The mixer should be in warranty, try getting it replaced.

___________________

quote:

Originally posted by Push2005 Ik ben net terug begonnen met cassettes op te kopen... Die pitchcontrol is echt ongelofelijk !

speakers are working
and so are other channels
mixer is brand new


is there a way this can be fixed?

what type of mixer do you have?
it sounds like everythign is working since you can preview it in your headphones you probably just aren't setting something right

If you have multiple channels (more than two), then you may should knobs that will let you control which channels the crossfader controls. ie the djm 500 or 600 or 3000 all have this. Look next to your crossfader for knobs that say cross fader assign or something to this effect. Let me know if this fixes it

___________________
When you dance, the DJ takes you on a journey, but he or she is usually not the focus of your experience at a club or festival or wherever you hear the music. Dancing is. Music is.

i have the vmx 300...anywayz i dont use all 3 channels at once.. i unplugged one channel and tried it on channel 2..and i got that problem..and there is nothing that i can assign the fader with its only channel 2 to channel 3