looks like you need to get some wires to hook up the speakers to the amp. the ones where the copper wiring is covered by the plastic thingie....then run those to the amp. Sorry I dont know what the fook they're called.

ok you only need 2 are 3 wires mate .. a phono from the output of the mixer (like the ones from the decks to the mixer) into one of the inputs on the amp .... ok . then from the amp just get some speaker cabel and trim off the plastic ider end and twist of the end of the nobs on the amp , and put the wire in and twist back on the nob .. then put the bare end of the wire into the hole on the screw on the back of the speaker make sure you have the right coulers from red to red and black to black .. then twist on the screws again and that shud be it man any probs just giv a shout

Cheers fella's!

I knew it'd be pretty obvious to others, i'm just generally a thick bastard when it comes to cables and wires.

Thanks again!

for mixer to amp get RCA cables...

go to an electronics store and ask where the audio cables are... theyre red and white ike you see on the back of the mixer and amp...length of cord will depend on how much you need, that being said id personaly shoot for a medium length cable as you may end up moving your equipment around sooner or later and i find having lot of extra length to be better than not having enough length

as for speakers just ask for speaker cables at the store... dunno the name but its basicly a red/blank wire and a black wire together, again, buy whichever length suits you

and thats it.. match the colors and youre good to go

___________________
*Fav tune at the moment*
Vector Burn - Paradise Lost
"This is the life we chose, the life we lead. There is only one guarantee - None of us will see heaven"

quote:

Originally posted by RickyM Next thread - trance for listening to when you are halfway down the stairs in your house...