hey everone. been mixing for about 6 months. i have beat matching down. i am wondering whem some of yall mix ow do you do your bass line. meaning

if you put 2 base lines on top of each other tou get times the bass. witch is loud and nice but to noticable.

when you are putting a song in do you leave the bass off in it untill u hit a que then switch bass lines at the same time so that the song u are now pulling out hass the bass all the way down.

or is there a happy medium in there.

i have watched armin and ferry both spin and i rarley se them messing with the bass that much.

just looking for some different ideas.

Don't mix basslines on top of each other.

Never, ever mix basslines on-top of each other unless you're 110% sure that it will work well (which is very rarely the case). Look again at Ferry and Armin's mixing; both of them adjust the low-end EQ during transitions.

So how do I adjust the low-end EQs when I mix? Gradually. Adjust each EQ at the same time, the same amount of distance (just in a different direction for each knob; lowering the outgoing track, raising the incoming). Sometimes quick EQ kills work, but I find that a gradual transition is far more pleasing to listen to.

Agree with idoru but it all depends. If you switch them quickly, and at the right moment, it can sound fine too, just depends on the tracks. When doing a longer mix usually slowly switching basslines is the better option.

When I saw Phil K live a few days ago, I noticed he'd leave the bass all the way up on the incoming channel, untill about halfway up with the fader, when he'd slowly bring the fader all the way up while taking out the outgoing track's bass. Seemed to work pretty well.

___________________

quote:

Originally posted by ******** Seplling don't demonstrate intelligence and educatoin - knowing does.

quote:

Originally posted by super trance hey everone. been mixing for about 6 months. i have beat matching down. i am wondering whem some of yall mix ow do you do your bass line. meaning if you put 2 base lines on top of each other tou get times the bass. witch is loud and nice but to noticable. when you are putting a song in do you leave the bass off in it untill u hit a que then switch bass lines at the same time so that the song u are now pulling out hass the bass all the way down. or is there a happy medium in there. i have watched armin and ferry both spin and i rarley se them messing with the bass that much. just looking for some different ideas.

I honestly only have about 3 or 4 records in my modest collection that have a similar enough bassline to somewhat compete/compliment with.

For the most part, play only one bassline at a time, less the other low end EQ's are percussion based only where there is no conflicting key.

quote:

Originally posted by super trance i have watched armin and ferry both spin and i rarley se them messing with the bass that much. just looking for some different ideas.

They both mix harmonically.

___________________
Fortuna Favet Fortibus.

if you mix in key its quite easy (and imo preferable) to overlay the basslines.

___________________

wtf? All these responses are bogus, sorry.

Myself, and all my close friends constantly mix with the basslines at normal EQ levels. We have had no problems, the basslines don't DOUBLE in volume, when overlayed frequencies do not add up, they simply lay on top of each other. So in the end, most Basslines are 'engulfed' by another bassline as they usually fit within each other.

This strikes me as weird that some people kill the bassline in one song and then switch at some point, to be quite frank, that will only work if the two basslines are EXACTLY the same.

Quite frankly, if you cannot mix basslines, there is something fundamental missing in your learning steps.

quote:

Originally posted by alefort when overlayed frequencies do not add up, they simply lay on top of each other.

yes they do add up, not sure about double, but they do add up. this is pretty simple to check. record your set and watch how the wave looks like afterwards. it's much louder in the parts where you have 2 tunes playing at the same time at full volume and full bass than what it is when there's only one track playing. just check it out. the difference is noticable even if the bass is killed and you don't lower the other track's volume at all when you bring the new tune in.

___________________

Get Dropbox, with 250 MB extra space!

I usually have the incoming track's bass knob at about the 9 to 11 o'clock position before I completely bring it in and kill the outgoing tracks bass. So I suppose you can say I mix the two basses a little bit together but never completely. But you have to time it almost perfectly when switching them in/out for there not to be an obvious delay in sound.

quote:

Originally posted by alefort wtf? All these responses are bogus, sorry. Myself, and all my close friends constantly mix with the basslines at normal EQ levels. We have had no problems, the basslines don't DOUBLE in volume, when overlayed frequencies do not add up, they simply lay on top of each other. So in the end, most Basslines are 'engulfed' by another bassline as they usually fit within each other. This strikes me as weird that some people kill the bassline in one song and then switch at some point, to be quite frank, that will only work if the two basslines are EXACTLY the same. Quite frankly, if you cannot mix basslines, there is something fundamental missing in your learning steps.

It all depends on what genre you're spinning. I find that if done well, killing the bass allows you to create a much more seamless transition. You'll find that most DJs kill the lows to a great extent. There's always a point in each transition where, yes, both Lows will not be totally killed, but I don't ever keep them all the way up simultaneously.

quote:

Originally posted by DOOMBOT I usually have the incoming track's bass knob at about the 9 to 11 o'clock position before I completely bring it in and kill the outgoing tracks bass. So I suppose you can say I mix the two basses a little bit together but never completely. But you have to time it almost perfectly when switching them in/out for there not to be an obvious delay in sound.

I've found myself doing this more and more as well. Quite like the sound it gives, as one track doesn't sound too hollow.

Anyway, another factor is the mixer. Different mixers have different 'strength' Eq's on them.

So where i might 'kill' my bass line, my mixer doesn't have a complete kill feature on my EQ (Vestax PCV 275)..

I often find myslef lowering the EQ all the way down then using the handy kill switches which the PCV 275 has to lower the EQ even further. (again it still doesn't really completely kill everything, but it's good enough for me.)

Anyway, There's no right way or wrong way, but i know for a fact that bring two tracks in with the bass right up there on both tracks can defnitely lead to disaster. Then again if you're fading is pretty decent you might be lowering the bass (+tune) perfectly in time to ther other track coming in.

There are so many options here, it's nearly better making this thread a "What style of low end mixing do you prefer" thread.

Just my 2p

nelly