AFAIK, the only difference between a 4-pin and 6-pin firewire plug is power. The 4-pin firewire is data only and can not power any extrenal devices, so the bandwidth is the same. You'll just have to power the 410 externally.

___________________
-~-

my 410 came with both, 4to6 pin and 6pin cables. it's weird that yours doesn't have that.

like aquila said though, the only difference is that 4pin isn't buss powered. it's crappy that pcmia isn't buss powered either, so you can't get a firewire pcmia card and run it through there. it makes me sad and angry.

I have a firebox and was disipointed that i had to use the power supply because my laptop didnt have firewire built in, meaning i had to use pcmcia.

bought a 4-6pin cable. thanks for the advise. I have a new g@d damn problem now. I feel noobish to start another thread and just finished searching with no results. Heres the problem:
I am connecting logitech 640 5.1 surround sound speakers to 3 of the 8 1/8 outs (thanks to 1/4 to 1/8 adaptors) but two lights light up next to output signal 1 and 2 (front of the card) only. No matter where I connect the speakers (be it 3,4,5 or 6,7,8) only 1 and 2 light up. I am so frustrated with my lack of knowledge in this field I'm going crazy

___________________
"The only thing that interferes with my learning, is my education"
- A. Einstein

Last edited by gorex on May-20-2006 at 00:45

I have a similar problem to yours, maybe someone can answer one of us and it would help us both. My problem...

On the front it has the main volume control knob, sometimes it works, sometimes it doesn't and I have to go into the M-Audio control panel thing in the system tray and adjust my output volume there. I don't know why the hell this keeps happening.

___________________
Facebook | MySpace | Twitter

The Mixer is pretty weird.. I have all the SW outputs in the mixer, going out of their respective output, and 1/2... so Out 1/2 goes out to 1/2 then Out 3/4 goes to 1/2 and 3/4 and so on.... I don't understand it properly but that's how I have it and it works fine..So if im playing out of 3/4, I get 2nd and first lights flashing on the 410.

Does the audio come out of the other outputs even though the lights on the front don't go on?

quote:

Originally posted by RoBDaWG I have a similar problem to yours, maybe someone can answer one of us and it would help us both. My problem... On the front it has the main volume control knob, sometimes it works, sometimes it doesn't and I have to go into the M-Audio control panel thing in the system tray and adjust my output volume there. I don't know why the hell this keeps happening.

Iv never had any exp with the m-audio device but i can recall hearing people on this forum having a similar problem with the volume control. Due to hearing things on this forum i didnt buy the m-audio.

Does the manual have a diagram of exactly what each light represents? Might answer a few questions.