I've got CDJs and a DJM-400 from Pioneer hooked up to my PC for recording purposes using a stereo RCA to male speaker connector, which I plug into to the pink outlet I usually use for my microphone, and then my speakers are connected using the other audio-outs on the mixer.
My issue is that to avoid the audio input to my computer being far too loud (and starts clipping or whatever) unless I turn down the volume on my mixer to maybe 35% of max. To compensate for that, I have to turn my speakers up to 75% of maximum volume, making them do that annoying static thing whenever I change the volume.
I have Audacity, VDJ and Ableton for recording. Any suggestions on what I can do to get an audible volume level without having to turn down my mixer so much? I'm really hoping my motherboard's onboard sound will be able to do the trick as well as one of the more expensive externals.
Nov-29-2008 08:49
skip
a.k.a. skip2
Registered: Sep 2002
Location: home or somewhere else
don't plug it in to the mic in! use the line in instead. and there's no such thing as a "male speaker connector", you're probably referring to the 3.5 mm mini plug. if you care about sound quality though, you most likely have to get a proper sound card as integrated sound cards usually have horrible sound quality with all kinds of static noises, clicks and pops (and in the worst cases sound from scrolling your mouse or something stupid like that).
Use the line in or midi jack you get better connection with less noise. A stand alone sound card will always work better then on board audio for production, recording and mixing because of less noise overall in ways.
___________________
DJ WESLEYSNIPEZ
Inspire Create Innovate
Dec-01-2008 01:51
david.michael
Supreme tranceaddict
Registered: Sep 2003
Location: Dayton, OH, USA
"Volume Control" control panel.
Go to "Properties" under the "Options" menu.
Select to adjust volume for Recording.
Turn the input down on your mic input, as well as go into the "Advanced" properties for it and de-select "mic boost". Or, as aforementioned, switch to the "Line In" input instead.
Whatever you end up plugged in to, adjust the levels in here accordingly, but remember to switch between "Playback" and "Recording"!
Dec-01-2008 14:09
david.michael
Supreme tranceaddict
Registered: Sep 2003
Location: Dayton, OH, USA
quote:
Originally posted by wesleysnipez
midi jack
MIDI jack doesn't transmit audio.
Dec-01-2008 14:09
desdel
Junior tranceaddict
Registered: Nov 2006
Location: Vancouver
Line in was key. I don't have to plug my speakers into my mixer now either! Thanks guys.
