Hi all, got a problem with my decks, wondered if anyone could help. 1210's mark 2 - the small earthing wire has been cut so I need to replace it, however having taken the deck apart I have found I can't quickly replace it as it has been souldered. would anyone know the best way to go about replacing this wire? also where I could buy a new wire from? any advice would be greatly appreciated! thanks

if you don't know how to solder, i suggest finding someone that can, as for the wire, take the old one with you and find one of a similar guage and you're good to go, any electronics store should be able to help you out

___________________
Tony Morello Dot Com
Soundcloud
Facebook
Twitter
The Drunken Monkey Podcast
The Mixdown Podcast presented by Tony Morello

quote:

Originally posted by shorty100 Hi all, got a problem with my decks, wondered if anyone could help. 1210's mark 2 - the small earthing wire has been cut so I need to replace it, however having taken the deck apart I have found I can't quickly replace it as it has been souldered. would anyone know the best way to go about replacing this wire? also where I could buy a new wire from? any advice would be greatly appreciated! thanks

Go find some diy videos on soldering and I promise you you'll be able to solder it yourself. There's also a mod you can do so you can completely eliminate the ground wire. Let me find it,

http://www.youtube.com/watch?v=wK9rK6yLR7U

Not super clear on what to do, but you'll get it.

If you decide to keep the ground cable then find a good conductive wire to use.

if you don't know what you are doing ( i don't either) take your gear in.

paying a little for repairs is way better than having to buy a new one because you wanted to save a few bucks.

___________________
ania will you marry me?

Thanks for the advice hopefully will sort it over the weekend. Much appreciated.

electronic shop will charge you like 50 bucks, if you can i would recommend soldering it yourself.