|
| quote: | Originally posted by Wayne_B
Hey.. I dunno about this but there are a couple areas you can look at:
It could be your cables etc You can try different cables of course but also keep your signal cables away from any power cables or devices that can be avoided.
As mentioned before, try reinstalling your drivers and Live cos there's a definite problem there but before you do that check you settings in the audio tab in Live. Maybe your latency is set too low. For onboard sound cards your might be stuck with the worst possible setting (bigger buffer size).
If its your cables you can buy ground loop isolators which will remove unwanted feedback. There was a topic on here about them recently.
Hopefully you'll sort out the problem soon |
I just use the laptop for internet and such now, prior I would just hook my external audio device up to it when doing productions/mixes. Just cut the noise sample swiotched it over to the laptop and ran the analysis and everything there, then uploaded it.
Disregard the live freaking out heh.
|