|
gooseneck lamps
|
View this Thread in Original format
| S-a-M-u-E-l |
| where do they plug into? |
|
|
| opianstate |
| mine plugs into the BNC? outlet on the top of my mixer . . . some mixers have an outlet for them and some don't. |
|
|
| Dj Flesch |
| The input is better known as the microphone input. It has three holes on the bottom inside of a female O plug |
|
|
| Dj Thy |
Depends, there are two connections : the XLR input like Flesch says, and the BNC connector like opianstate says (that one is coaxial, same connector as on older Ethernet cards).
But a lot of mixers don't have a dedicated light connection at all, so if that's the case, you'll need a lamp with an external PSU. |
|
|
| Dj Spiel |
| So thats where it goes lol |
|
|
| PVD fanatic |
| so for the mic input for my pioneer djm-500 mixer what kind of lamp coudl i use? or what would i be looking for as far as out of the lamp? |
|
|
| Dj Thy |
Don't mistake the lamp connection with a mic connection. They can both have the same connection (XLR) but it doesn't mean that you can plug the lamp in the microphone input.
As far as I remember the DJM500 has no dedicated lamp connection, so you'll have to find a lamp with external PSU. |
|
|
|
|
