|
3tt only 2 chanels
|
View this Thread in Original format
| vaes |
how can I put 3 tt in my mixer ;
got 2 phono channels
couple of cd channels and an aux
somebody told me I could jam it in the aux channel
I'm not shure
anybody?
thanx
Vaes |
|
|
| vswede |
| you can probably use the line in instead of phono but there might be a difference in sound levels so you will have to change the gains... i think |
|
|
| OMNIFEX |
If you have three faders, you can buy a phono preamp,
and, connect it to the fader that offers only a line
input.
If your mixer only has two faders, time to buy a new mixer. |
|
|
| Freak |
I run 2 cd players and 2 ttts through a 2 channel mixer.
I use the Fx return as an extra channel and put the effects over the master output instead- I had to buy a preamp tho. Cost me $10 from radio shack (via ebay).
get a preamp and put it in your aux, just search ebay for 'phono preamp' |
|
|
| DJ 00 Tommy |
| It all depends if you want to be able to switch from one turntable to any of the others at once. Obviously if you want to proply be able to use all three its time to upgrade but for me im using to outputs from my comp and a tt with a 2 ch, because im using the computer i can swap the songs from deck to deck on the computer then on the mixer i just flick the line-phono switch and voila :happy2: |
|
|
|
|
