return to tranceaddict TranceAddict Forums Archive > DJing / Production / Promotion > DJ Booth

 
Deck Probelm
View this Thread in Original format
DJ-Igloo
ok guys i have a probelm its been happeing off and on now its staying my right deck is putting out so week compared to left deck idk why either any ideas ive changed neededs and checked plugs
djsnazzy
it might be the phone leads this heppins to me one of the phonos on my technic is dodgy and goes mono if not in the right place . its a pain in the neck when it happins like . maby thats the problem
DJ-Igloo
how hard is it to replace the plugs on the techs
djsnazzy
well i dono about opening the tech up but you could cut off the phono head strip the wire and get another phono head and put it on
i got big pants
jiggle it around. thats what i do
DJ-Igloo
tried that didnt work
im thinking about splcing the end of one of the new rca cords i bought and seeing if that fixes it
sw1
quote:
Originally posted by DJ-Igloo
ok guys i have a probelm its been happeing off and on now its staying my right deck is putting out so week compared to left deck idk why either any ideas ive changed neededs and checked plugs

Have you tried the left headshell/cartridge on the right table? Maybe dirty contacts between headshell and tonearm on right table?
Have you checked the audio cable for continuity from the tonearm end to the plug end? I wouldn't start cutting wires unless there was a break in them.
DJ-Igloo
Well im goan take it down to the local dj shop tommrow so will see
i got big pants
check your ground wires
DJ-Igloo
I did the funny thing is when i plucked it into another mixer and routed that ourher mix in to the main mixer for my decks it worked fine

sw1
quote:
Originally posted by DJ-Igloo
I did the funny thing is when i plucked it into another mixer and routed that ourher mix in to the main mixer for my decks it worked fine

That could just be the line level output from the other mixer. How does it sound using the other mixer only? Do you have a phono/line switch at the phono input at the back of your main mixer?
Dervish
It doesn't sound like it is your deck, if it works on a differnt mixer.
CLICK TO RETURN TO TOP OF PAGE
 
Privacy Statement