|
I ****ING HATE my whitelabel!!!
|
View this Thread in Original format
| colombian raver |
I made a thread earlier about my whitelable sucking at high frequencies but now it's just sucking ass all together. Its REALLY pissing me off because I spent a lot of money on what I was hoping to be a top of the line needle only to have it sucking ass within 3 months. I could only afford to buy a second one next week so I though it was going to suck having a really ty stanton needle that came with my old table as my second needle for a while but who would have imagined me HATING to mix into the table with the whitelabel because it SUCKS SO MUCH.
The $20 stanton needle is kicking the whitelabel's $100 ass! I tried cleaning the contacts and everything. Its not a dirty record beacuase even brand new records are sounding like while the stanton plays thems them without a hitch. I was thinking I just may have been unlucky and got a crap one but Im ing pissed that im going to have to buy ANOTHER ing needle already.
It can't be the speakers or the mixer because I took out my old little amp that has a headphone jack, no going through any mixer or anything just straight from the needle to my headphones and it sounded the same. I really want to buy a diffrent needle because I don't trust the whitelabel anymore. I wanted the ortofon's but I heard they really wear your records and I'm really only looking to buy an all in one headshell type needle.
This sucks so ing much, all I've been doing all summer is saving for my tables, saving for my mixer, saving for the needles and now when I thought I was finally done this week and could finally return to just buying records my needle craps out and I have to spend all of this weeks check on 2 ing needles that I don't even know are going to be whitelabels or not and then wait another 2 weeks to finally buy my first record in over a month.
[/rant]
Guys I need to know if theres a way to get my money or ANY money out of this stupid whitelabel back. And then if I should get the ortofons or the whitelabels. I really don't want to buy 2 more whitelabels in fear that they will crap out on me and that I will have to constantly be taking extra special care with them and I don't want my records to get torn up with the ortofons. The main reason I don't want anything else is because I hate hooking up the cartridge to the headshell but if I MUST get one like that then I will
To sum all this and giant rant.
I simply need a needle that I KNOW will last long not having to be extra special careful with it all the time and will sound excellent |
|
|
| colombian raver |
This right here just shot up my expectations for the ortofons
"Therefore, the Ortofon disco cartridges are equipped with cantilevers made from aluminum tube with increased wall thickness. Special attention has also been paid to the attachment of the bearing and the design of the bearing itself. This means that rough treatment will neither damage the cartridge nor degrade its stability."
That was my main concern just throw right out the window. |
|
|
| DjWhooCares |
ive had whitelabels for 2 yrs now...havent changed the stylus or anything yet...TOP NOTCH...
a local dj who uses ortofons is thinking of buying some..THEIR that good.. |
|
|
| colombian raver |
| So do you think I just got a dud? |
|
|
| Cosmic Realm |
iv heard of some people getting duds from when they were first made...
hopfully your luck changes m8 :wtf: |
|
|
| colombian raver |
| When I get back from work tonight I will put up a sample of the same exact record on the whitelabel then the stanton so you can see how bad it is. |
|
|
| KristineClub |
| Have you tried changing the weight on your tone arm? I've had Whitelabels for a while too and I've only had to replace one of the stylus and that's just because some dummy bent it. |
|
|
| colombian raver |
Heres that sample. The first take is the crappy stanton needle and the second is the whitelabel. You will hear a little bit of the same noise thats plauging the whitelabel with the stanton because my recording software, but trust me, when the stanton is playing that same song, I can turn up the volume in my headphones all the way and there is no distortion at all. You can even hear the stanton hum when I take it off just to let you know how crappy it truly is.
http://waxdj.com/DJ88
It's the one titled Whitelabel sucks of course. |
|
|
| DjWhooCares |
| u prolly have too much weight on em bro...the whitelabels are pretty heavy...put down the weight and the height @ 3...thats where i have em...have no problems...anti skip 0 |
|
|
| colombian raver |
| I have the height at 0, the weight at 2, and the anti skate at 0. |
|
|
| djkoolaide |
| so... try his suggestion and set the weight and height to 3. |
|
|
| colombian raver |
| quote: | Originally posted by djkoolaide
so... try his suggestion and set the weight and height to 3. |
It's not that. I have tried every kind of setting you can think of.
I know how to set up a tone arm.
The only thing that has gotten any kind of positive results is setting the weight to like past a full rotation past 0 and it sort of helps. |
|
|
|
|
