|
dented tweeter... best way to pop it out?
|
View this Thread in Original format
| Sound O fTrance |
So I purchased a set of monitors on ebay and one of the monitors have a tweeter that was dented (pushed in)
what would you guys recommended to pop it back out?
here is a picture of the tweeter :eyespop:
 |
|
|
| THE_MARSBAR |
| Something sticky like a bit of tape could fix your problem. But: BE GENTLE! |
|
|
| Soundwerks |
| yeah, I also heard you can use stick tape. Stick it in the "dent" and pull it out gently. If you cant do it, bring it to a good, high-end stereo shop (not a Futureshop....a real audio store)...they can do it in like 2 mins. |
|
|
| Mmanu |
You bunch of fools. Sticky tape, are you nuts???
open the whole speaker, and push the tweeter cone from behind IF YOU HAVE ACCESS
Since it looks like a metal cone, you'll it up if you use tape:rolleyes:
What kind of speaker is it anyway? |
|
|
| THE_MARSBAR |
| Go see a place where they sell high-end stuff as Soundwerks said. |
|
|
| tintin11 |
| just get your house vaccum and BOOM pop the sucker out. |
|
|
| Stu Cox |
| quote: | Originally posted by Mmanu
You bunch of fools. Sticky tape, are you nuts???
open the whole speaker, and push the tweeter cone from behind IF YOU HAVE ACCESS
Since it looks like a metal cone, you'll it up if you use tape:rolleyes:
What kind of speaker is it anyway? |
Tweeters are nearly always (if not always) closed. In fact just about all speaker cones are these days. So short of dismantling the actual speaker cone... (which is not recommended, it must be said) |
|
|
| Sound O fTrance |
used scotch tape, applied it gently
and it pulled out just fine
thanks everyone for the suggestions! |
|
|
| THE_MARSBAR |
| Glad you had your problem fixed. |
|
|
|
|
