return to tranceaddict TranceAddict Forums Archive > DJing / Production / Promotion > DJ Booth

Pages: 1 [2] 3 
Ack! (pg. 2)
View this Thread in Original format
j_spot
Well I have found my needles!WOOHOO! but..........

one of my tables is ed. There is no right channel from it. I tried different mixer, changing stylus, changing the headshell, nothing worked.---Any other suggestions before I take it in?
DJ LIQUID
quote:
Originally posted by DJ_Shockwav


don't worry, they're coming... my voice has been shot for the past week due to a bad cold, but it's clearing up now :)


hehe sorry for bein an ass :D

i just thought u forgot about me :(


im making a new MIX CD so hopefully if i get them intime you'll be in it :)
DJ LIQUID
quote:
Originally posted by j_spot
Well I have found my needles!WOOHOO! but..........

one of my tables is ed. There is no right channel from it. I tried different mixer, changing stylus, changing the headshell, nothing worked.---Any other suggestions before I take it in?



most likely its the headshell....

try cleaning the connectors/RCA's
j_spot
I tried changing the headshell..

might it be the connection in the tonearm?
DJTJ
quote:
Originally posted by j_spot
I tried changing the headshell..

might it be the connection in the tonearm?

Most probably, this is a common problem with Ortofon Concordes. Get a Q-tip, dab it in some isopropyl alcohol (aka IPA) and wipe it over the connectors on the back of the Ortofons and also on the connectors inside the tonearm. Try to shove the Q-tip in fairly hard, because the connectors in the tonearm are spring mounted - they could have got pushed in and got stuck, so try to force them out if this is the case.
j_spot
considering I dont have concordes....????
JohnSmith
congrats about finding your needles man..

just curious, where were they?

also, i am planning on getting some ortofon carts, cuz i hear they are the best for trance. this other guy is trying to sell me on some stantons..

should i go with the stantons, if only because they won't corrode or damage the connectors on my tonearms?
j_spot
they were in my record case after all
they had fallen between 2 records, and I looked in front, on the sides and in back, but not between! Then I was going to pack up agian, and they wouldnt get close..and VOILA! they they were
JohnSmith
Sweet. it would really suck to lose those babies.
DJTJ
Ah, didn't realise you had the OMs. Uh, in that case just make sure the wires from the headshell are connected properly to the pins on the back of the cartridge.

DJ_Shockwav
quote:
Originally posted by DJTJ
Ah, didn't realise you had the OMs. Uh, in that case just make sure the wires from the headshell are connected properly to the pins on the back of the cartridge.


he doesn't have the OMs... its the nightclubs, but not the OM version

and he found his needles exactly where i told him to look :)
j_spot
and as it turns out I tried the old lick it then stick it, and it worked

so now off to the drug store for some isopropanol alcohol...cleaning time!
CLICK TO RETURN TO TOP OF PAGE
Pages: 1 [2] 3 
Privacy Statement