|
Need Help Selecting A Amplifier
|
View this Thread in Original format
| Rinster |
hey guys, im finally getting my dj setup.. so far i got -
Denon Mixer DN-X1500
Denon Cdj's HS-5500 2x
need to find the right amplifier for these, anyone got a suggestion?
thanks in advance.
Rinster. |
|
|
| echosystm |
| what kind of speakers will you be connecting to said amplifier? why not just buy powered speakers? |
|
|
| Rinster |
| quote: | Originally posted by echosystm
what kind of speakers will you be connecting to said amplifier? why not just buy powered speakers? |
i dont got so much knowledge of the hardware yet..
i was planning of getting 2 of the Jbl JRX125..
| quote: | System Type: Dual 15" 2-way, sound reinforcement speaker
Frequency Range (-10 dB):2 35 Hz - 16 kHz
Frequency Response (±3 dB):2 45 Hz - 12 kHz
Sensitivity (1w/1m): 100 dB SPL
Nominal Impedance: 4
Power Capacity:1 500 watts
Peak Power Capacity:1 2000 watts
Maximum SPL: 133 dB
Nominal Dispersion: 90° x 50°
Crossover Frequency: 2 kHz
Dimensions (H x W x D):3 1092 mm x 464 mm x 432 mm (43 in x 18.3 in x 17 in)
High Frequency Driver: JBL 2412, 1" exit compression driver mounted on Progressive
Transition™ Waveguide
Low Frequency Driver: JBL M115-8A x 2
Input Connectors: Neutrik® Speakon® NL-4 (x1); ¼" TS phone jack (x1); parallel.
Enclosure Construction: 19 mm (¾ in) MDF (Medium Density Fiberboard); with glued and mechanically fastened joint detail; covered in black carpet.
Grille: 18-gauge, powder-coated steel.
|
 |
|
|
| Rinster |
| what would be the best amplifier for this setup? :) |
|
|
| palm |
| ask to get a package price wherever u buy the speakers and they will find a suitable amp for those speakers. but are u planning to have this at home? overkill imo |
|
|
| Rinster |
| quote: | Originally posted by palm
ask to get a package price wherever u buy the speakers and they will find a suitable amp for those speakers. but are u planning to have this at home? overkill imo |
these speakers are gonna be for throwing parties.. :D |
|
|
| Kevy Kev |
| Me and my friends used to have the craziest house parties with alot of ghetto speakers and a few amps from a pawn shop. |
|
|
| Rinster |
that is really nice.. but my budget for a Amp would be around $600/800,-
:) |
|
|
| Zild |
Ideally you want an amp that puts out at least the RMS power your speakers can handle. Go for a good brand like QSC, Crown, etc...
I would look for something about 1000wx2 @ 4ohms since I think those are 4 ohm speakers. You can get something smaller, but I wouldn't go lower than 500x2@4ohms. Those are RMS values not peak values. The more power you get the more headroom you will have for dynamics and it will keep you from running your amplifier too hot and burning your amp/speakers up. Don't skimp on this. Get smaller speakers if you can't afford a proper amp. |
|
|
|
|
