TranceAddict Forums Archive > DJing / Production / Promotion > Production Studio Pages: [1] 2 3  synth used for lead in "not exactly" View this Thread in Original format piku303 ok hate me cause all a lot of you guys are deadmau5 haters...but i wanted to know if any of you guys knew what kind of synth hes using for the "not exactly" lead. it sounds very crisp and pleasant as the cutoff increases...almost sounds analog. thanks Freak Its a moog preset called china something (I forget, as its upstairs and I cant be assed to check) that has been ever so slightly tweaked hasbone sawtooth modulated with filter envelope piku303 quote: Originally posted by Zombie0729 no, he uses power chords, the moog is monophonic. really you can do it with almost any synth, see example below done in zebra and/or z3ta: http://download.yousendit.com/8521CB5973D50A44 he still could have done it with a moog. it has multiple osc. he could have changed the pitch of the second osc to a 5th or whatever. it sounds way too good to not be analog. Timothy quote: Originally posted by Zombie0729 no, he uses power chords, the moog is monophonic. really you can do it with almost any synth, see example below done in zebra and/or z3ta: http://download.yousendit.com/8521CB5973D50A44 It's quite possible to do this lead on a monophonic synth by setting the 2nd osc to a 5th like piku303 said. Here is the melody played with only 1 finger to just show it :p Monophonic lead T-Soma quote: Originally posted by Zombie0729 no, he uses power chords, the moog is monophonic. really you can do it with almost any synth, see example below done in zebra and/or z3ta: http://download.yousendit.com/8521CB5973D50A44 Sounds pretty crap when you open the filter up :( Zombie0729 i'm done helping. mysticalninja needs moar amp+filt release, plus an octave down or something, not deep enuf. And yea, was prollly made on moog. Timothys is a bit closer sound wise. Wheres teh maouse? thecYrus here's my try. it's very hard to match the timbre prefectly http://www.solarproject.ch/linked/cYrus_notexactly.mp3 kadomony here: Use moog. You only need the 1st 2 oscillators for this. Turn off the 3rd. 1st Osc: -Range 32' -Saw Waveform 2nd Osc: -Range 16' -Saw Waveform -Transpose +7 semitones Filter: Cutoff Freq: ~158.7Hz Filter Emphasis: 0% VCF Contour Amount: ~55.76 ST Attack: 1ms Decay: 113ms Sustain: -12.4dB Loudness Contour: Attack: 1ms Decay: 913ms Sustain: 0dB Play in C4. to get the increase in rawness like in not exactly, open up the cutoff freq and the contour amount knob at the same time. piku303 i like the first part....use moog. yeah i need one of those. quote: Originally posted by kadomony here: Use moog. You only need the 1st 2 oscillators for this. Turn off the 3rd. 1st Osc: -Range 32' -Saw Waveform 2nd Osc: -Range 16' -Saw Waveform -Transpose +7 semitones Filter: Cutoff Freq: ~158.7Hz Filter Emphasis: 0% VCF Contour Amount: ~55.76 ST Attack: 1ms Decay: 113ms Sustain: -12.4dB Loudness Contour: Attack: 1ms Decay: 913ms Sustain: 0dB Play in C4. to get the increase in rawness like in not exactly, open up the cutoff freq and the contour amount knob at the same time. Zombie0729 quote: Originally posted by kadomony here: Use moog. You only need the 1st 2 oscillators for this. Turn off the 3rd. 1st Osc: -Range 32' -Saw Waveform 2nd Osc: -Range 16' -Saw Waveform -Transpose +7 semitones Filter: Cutoff Freq: ~158.7Hz Filter Emphasis: 0% VCF Contour Amount: ~55.76 ST Attack: 1ms Decay: 113ms Sustain: -12.4dB Loudness Contour: Attack: 1ms Decay: 913ms Sustain: 0dB Play in C4. to get the increase in rawness like in not exactly, open up the cutoff freq and the contour amount knob at the same time. umm post your sample dude cause i just took your patch verbatim to my voyager and it sounds nothing like it CLICK TO RETURN TO TOP OF PAGE Pages: [1] 2 3

Privacy Statement