|
technics SL-1210mk2 problem
|
View this Thread in Original format
| shorty100 |
| Hi all, got a problem with my decks, wondered if anyone could help. 1210's mark 2 - the small earthing wire has been cut so I need to replace it, however having taken the deck apart I have found I can't quickly replace it as it has been souldered. would anyone know the best way to go about replacing this wire? also where I could buy a new wire from? any advice would be greatly appreciated! thanks |
|
|
| Tony Morello |
| if you don't know how to solder, i suggest finding someone that can, as for the wire, take the old one with you and find one of a similar guage and you're good to go, any electronics store should be able to help you out |
|
|
| tintin11 |
| quote: | Originally posted by shorty100
Hi all, got a problem with my decks, wondered if anyone could help. 1210's mark 2 - the small earthing wire has been cut so I need to replace it, however having taken the deck apart I have found I can't quickly replace it as it has been souldered. would anyone know the best way to go about replacing this wire? also where I could buy a new wire from? any advice would be greatly appreciated! thanks |
Go find some diy videos on soldering and I promise you you'll be able to solder it yourself. There's also a mod you can do so you can completely eliminate the ground wire. Let me find it,
http://www.youtube.com/watch?v=wK9rK6yLR7U
Not super clear on what to do, but you'll get it.
If you decide to keep the ground cable then find a good conductive wire to use. |
|
|
| notelfreak |
if you don't know what you are doing ( i don't either) take your gear in.
paying a little for repairs is way better than having to buy a new one because you wanted to save a few bucks. |
|
|
| shorty100 |
| Thanks for the advice hopefully will sort it over the weekend. Much appreciated. |
|
|
| msz |
| electronic shop will charge you like 50 bucks, if you can i would recommend soldering it yourself. |
|
|
|
|
