|
how to connect my reciver with mixer?
|
View this Thread in Original format
| teatea |
i am using normal home receiver...
but how to connect it with my djm600 mixer?
help!
also do i put the stero cords to phono or line on my mixer?
finally get my volt tansformer today,but still cant play yet :confused:
edit: ps. my mixer manual write in japnese,which i cant read.
so plz help. |
|
|
| u4ea |
Sorry if I insult you with this reply, I'm just trying to explain everything :D
I take it, you are using 2 turntables or cd players as your sources. Get 2 RCA cables, plug one RCA cable from turntable#1 into Phono 1 (or CD#1 into Line 1) and the other RCA cable from turntable#2 into Phono 2 (or CD#2 into Line 2). OK, now your players are connected into your mixer. Now you need the output of your mixer to go into your stereo. Get a 3rd set of RCA cables, run them from your "master output" on your mixer, into an open slot on your stereo.
For example, if your mixer is connected via RCA cable to your CD input on your stereo, just select "CD" on your stereo as the output source, play something on the turntable/cd player, and hopefully you'll have some sound coming out of those speakers. (Watch the volumes/gain on your mixer, make sure they aren't maxed out)
:) |
|
|
| teatea |
| quote: | Originally posted by u4ea
get a 3rd set of RCA cables, run them from your "master output" on your mixer, into an open slot on your stereo.
|
"master output" <-- THANX this is what i need to know..
going to try now..thanx :) |
|
|
|
|
