|
Are instrument cables that important?
|
View this Thread in Original format
| Final Call |
| Hello all. Have a little question regarding instrument cables and especially microphone cables. For some reason, when i have my mic set up, there tends to be a bunch of noise pickup/bleeding. Before i had a mic floor stand and i figured it was the vibration of the floor (my room set up isn't really acoustically treated)so i bought a table top stand instead. I still get the same "loud" interference. The mic is an Audio-Technica AT2020 and i think i'm using some cheapo XLR cables. When i use a regular dynamic mic, it's not that bad and some of the noise isn't as loud as it is compared to the cardoid. My question here would be how important are cables in order to kill this massive interference. I want to think it'll stop the whole "noise" b/s if i picked up a shockmount for it, but i think i'll be pissed if i spent another 80 or so for a shockmount that is pretty much almost the price of the mic itself; to find out that i'm still getting the same issue. Would it be buying new XLR cables? Shockmount? or would it be just the mic itself? |
|
|
| BECK |
| i dont know anything about mics but for other sources always use balanced XLR - decent ones like Klotz. And make sure your soundcard is balanced too. |
|
|
| Final Call |
| quote: | Originally posted by BECK
i dont know anything about mics but for other sources always use balanced XLR - decent ones like Klotz. And make sure your soundcard is balanced too. |
hmm, seems like the cable i'm using right now is actually unbalanced. |
|
|
| BECK |
i have no idea whether mic-cables exists balanced ;)
i wouldnt know where the ground would come from lol. |
|
|
| J.L. |
This has nothing to do with the shockmount. It depends where you are plugging your cables into. It is an impedance mismatch most likely.
Also, it is a good idea to make sure your instrument cables aren't parallel to power cables. Always make them cross perpendicularly.
Take a look at this article:
http://www.tweakheadz.com/all_about_cables.htm |
|
|
| Final Call |
| quote: | Originally posted by J.L.
This has nothing to do with the shockmount. It depends where you are plugging your cables into. It is an impedance mismatch most likely.
Also, it is a good idea to make sure your instrument cables aren't parallel to power cables. Always make them cross perpendicularly.
Take a look at this article:
http://www.tweakheadz.com/all_about_cables.htm |
Hmm, i am using a Focusrite Saffire Pro USB6 and it has a combo jack.
This is the basic cable i'm using directly from the mic to the interface.
http://www.bestbuy.com/site/Hosa+Te...2&skuId=1126341 |
|
|
| BECK |
| maybe you need to enable phantom power on the soundcard input somehow? i dont know that soundcard but mine has something like that. never tried it though, but i guess that would be right to do on mics and guitars? not even sure what phantom power means but i guess its just an amplify of the signal, like a phono amp for turntables on a dj mixer. |
|
|
| Final Call |
| quote: | Originally posted by BECK
maybe you need to enable phantom power on the soundcard input somehow? i dont know that soundcard but mine has something like that. never tried it though, but i guess that would be right to do on mics and guitars? not even sure what phantom power means but i guess its just an amplify of the signal, like a phono amp for turntables on a dj mixer. |
still really get the same issue. idk. when i use a dynamic mic (some shure mic) it wasn't as "noisy". when i had a usb samson mic, it wasn't as bad as the noise is compared to the AT2020. maybe i'm just being lame and can't accept that my room space has horrible acoustics and sound leaks in from everywhere. |
|
|
| skyhunter |
I know from playing guitar cables can be important. It's usually because the cable is frayed or has a notch in it, or the jack plate is loose. Usually I can go from a "noisy" cable to a new one and the noise gets cut back noticeably.
But hey, I'm not a recording engineer. :/ |
|
|
| jupiterone |
| quote: | Originally posted by BECK
maybe you need to enable phantom power on the soundcard input somehow? i dont know that soundcard but mine has something like that. never tried it though, but i guess that would be right to do on mics and guitars? not even sure what phantom power means but i guess its just an amplify of the signal, like a phono amp for turntables on a dj mixer. |
don't suggest something if you don't know what it does. especially phantom power on mics |
|
|
| derail |
| quote: | Originally posted by jupiterone
don't suggest something if you don't know what it does. especially phantom power on mics |
Exactly. Phantom power supplies the power to microphones which require it. Some microphones have internal batteries and won't need phantom power.
wikipedia - phantom power |
|
|
| BECK |
| i was just brainstorming. sorry. |
|
|
|
|
