|
Would anybody like me to master their track?
|
View this Thread in Original format
| Atlantis-AR |
Would anybody like me to master their track? I've been out of it awhile and am looking to test my ability. EDM is preferred of course, and I will need to hear the mixdown prior to you sending me the high-resolution wave file, just to check levels and listen whether it's ready for mastering. First come first serve really, and depending on how things go I might be open to doing more. Make sure the level is kept well below clipping and bypass any mastering effects you may have. Then just send me an MP3 sample or post here.
UPDATE:
Please follow these simple steps:
- Ensure any master effects are bypassed and the mix level peaks well below clipping (I prefer at least 6 dB of headroom, i.e. a maximum peak of around -6.0 dB - don't normalise the file after rendering).
- Send me a ~190 kbps MP3 preview so that I can check the levels and listen whether it's ready for mastering; we can make any necessary changes at this stage. Of course, you can bypass this step if you're confident your mix is ready.
- Render a high-resolution WAV file of your track typically at 44,100 Hz, 32 bit float. If this option isn't available, use 24 bit. If you're looking for a slight, possible increase in quality (that is if you think your mix utilises frequency space above 22,050 Hz), you can render at 96,000 Hz or anywhere in between, but please check this has worked OK because sometimes it can mess any timings up.
- Please check the rendered file doesn't clip.
- Compress it with .7z, FLAC, RAR or ZIP. I can't stress this option enough, as it not only saves bandwidth but also ensures a 1:1 copy due to error checking.
- Upload it to a site such as MediaFire (preferred) or WeTransfer, unless you can provide your own hosting.
- Turnaround will be a couple of days, and I'll send you a preview first before sending the 16 bit file, as well as a 24 bit version if required.
About the mastering process:
I use a range of plug-ins to deliver a clean, professional master. You can expect your sound to be balanced, polished, sound more consistent, warmer, and least of all louder. I don't partake in the loudness war but I will push your track as far as it will go, all while retaining pristine dynamics.
A typical mastering project will consist of:
- Fine-tuning the frequency balance using linear-phase equalisation.
- Using compression to optimise and tighten the dynamic range.
- Using shaping or colouring EQ to further enhance the sound.
- Using harmonic excitation to add warmth and sparkle.
- Widening the stereo image.
- Fades and offset correction.
- Limiting for maximum loudness.
Your master will be processed at 96,000 Hz, floating point, and will be resampled and dithered to 44,100 Hz, 16 bit. I use Dynaudio near-field monitors, AKG studio headphones, and a larger home theatre setup for monitoring.
Samples:
Marcel Woods - Cherry Blossom (Magnetic Vision Remix) (please contact me when the link expires) |
|
|
| Evolve140 |
| yes. will keep u posted. :) |
|
|
| Atlantis-AR |
| Anybody else? I'm ready for another. |
|
|
| MegaMan |
| Atlantis-AR, what daw you use for mastering and hardware if any, also would like to know what type of monitors you got and room treatment if any. |
|
|
| Atlantis-AR |
| quote: | Originally posted by MegaMan
Atlantis-AR, what daw you use for mastering and hardware if any, also would like to know what type of monitors you got and room treatment if any. |
Nothing too serious...i.e. don't expect a ten thousand dollar master, and you might just be surprised. I've learnt to get by with my Dynaudio BM5A near-field monitors and am using plug-ins, with Sound Forge as the host. Basically I'm serious about getting a professional, polished sound, but it won't cost you anything. |
|
|
| EddieZilker |
| quote: | Originally posted by Atlantis-AR
Nothing too serious...i.e. don't expect a ten thousand dollar master, and you might just be surprised. I've learnt to get by with my Dynaudio BM5A near-field monitors and am using plug-ins, with Sound Forge as the host. Basically I'm serious about getting a professional, polished sound, but it won't cost you anything. |
And I'm just going to go ahead and vouch for the quality on that. I'm quite happy with his preview of work on my track and he managed to really nail the intent of the sound I was going for. Considering I think I could have done a much better mix, you've definitely exceeded the expectation. |
|
|
| Atlantis-AR |
Hey, first of all know that I would never master that loud, so if it's volume you're after then you'll have to look elsewhere... If however you want a dynamicaly rich and polished sound then I can see what I can do, but it will end up considerably softer than this 'wall of sound'.
And with hearing a preview first I actually ment to hear the mixdown first to make sure the levels are OK. It doesn't help me much to hear the master before actually mastering it, so start with an MP3 preview of the mixdown first. |
|
|
| Raphie |
Fully agree with Atlantis-AR, no tinkering on squashed self masterted tracks. No goodness to be found there.
Please do appreciate that Atlantis-AR is very serious about putting his time in some of your productions, it's a bit of an insult to ask for "Ozone oblitirated 128kbit MP3's" to be looked at....... |
|
|
| Cheriz |
so.....a mastering engineer is turning down a job? ok. ill go to the next guy.
This track is not yet mastered, and has ZERO clips!
no one's gonna play my track if its even a few dB softer than the next. maybe u should start using a VariMu instead of the hacked version of Waves on ur computer. THIS IS NOT BEETHOVEN! i dont know how you expect EDM tracks to have huge dynamic range.
The loudness wars suck but, like it or not, u gotta play the game if u wanna win even max graham understands this.
i now remember why i stopped coming to this site in the first place...everyone has a chip on their shoulder. |
|
|
| Atlantis-AR |
| quote: | Originally posted by Cheriz
so.....a mastering engineer is turning down a job? ok. ill go to the next guy.
This track is not yet mastered, and has ZERO clips!
no one's gonna play my track if its even a few dB softer than the next. maybe u should start using a VariMu instead of the hacked version of Waves on ur computer. THIS IS NOT BEETHOVEN! i dont know how you expect EDM tracks to have huge dynamic range.
The loudness wars suck but, like it or not, u gotta play the game if u wanna win even max graham understands this.
i now remember why i stopped coming to this site in the first place...everyone has a chip on their shoulder. |
Here is a screenshot of your mixdown: https://sites.google.com/site/atlan...?attredirects=0 |
|
|
|
|
