return to tranceaddict TranceAddict Forums Archive > Main Forums > Chill Out Room

Pages: 1 2 [3] 4 
My turn for a touch of sorrow (pg. 3)
View this Thread in Original format
igottaknow
quote:
Originally posted by wizniz
master/slave?

S&M? :p

slave
KilldaDJ
quote:
Originally posted by wizniz
master/slave?


http://www.helpwithpcs.com/upgradin...-hard-drive.htm

http://www.dansdata.com/sbs27.htm
DJ_Eternal
You'd only have to worry about master/slave settings if you were installing the hard drive into another computer where there are existing hard drives.

I'd still recommend the USB Enclosure into a USB Port. That way master/slave settings become moot.
gehzumteufel
wiz: do this..run to the local computer shop. buy a 350watt power supply (PSU). install it. if this fixes the problem you have your computer back. if not remove said psu and return to store.

and id suggest getting a dell 1505n or a macbook pro 15". :)
Ivand
if it sounds like its working, but theres no video, check the RAM
miamitrance04
quote:
Originally posted by wizniz
penn state university?


lmao
Nayil
sounds like the motherboard bios
Sunsnail
quote:
Originally posted by Ivand
if it sounds like its working, but theres no video, check the RAM


Even without RAM the bios should come up no?
gehzumteufel
quote:
Originally posted by Ivand
if it sounds like its working, but theres no video, check the RAM

if the ram is dead and not registering then it will beep. do the psu thing i mentioned. this will really tell you if it is the mobo or the psu.
gehzumteufel
quote:
Originally posted by Sunsnail
Even without RAM the bios should come up no?

no. the ram is necessary to get to the bios.

Ivand
quote:
Originally posted by Sunsnail
Even without RAM the bios should come up no?



iirc theres no video without RAM
Sunsnail
:conf: ok
CLICK TO RETURN TO TOP OF PAGE
Pages: 1 2 [3] 4 
Privacy Statement